Author |
Topic: Breaking a 2.3 Ultima saloon (Read 3505 times) |
|
r33per
Junior Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/linux.gif) 1998 S Reg 2.3 Ultima Saloon
Posts: 72
|
![](https://www.fordscorpio.co.uk/YaBBImages/sad.gif) |
Breaking a 2.3 Ultima saloon
« on: Oct 22nd, 2008, 9:15pm » |
Quote Modify
|
Hey folks. The Scorpio is in her final resting place! She's a 2.3 Ultima saloon S reg, but pre-facelift, the light blue-grey colour. Due to a previous altercations with a fence post and a towbar (don't ask...) the front and rear bumpers are a darker blue. Everything is up for grabs, apart from the front seats because I fancy them in either in my front room or at my desk... Also, I'm a complete car novice (I'm sorry? A what-ifold?) so I might end up asking dumb questions about exactly which bit etc. Last but not least, I must give my thanks to the forum admins and fellow users for their help and advice during my ownership of the Scorpio. Without a doubt, some of the monies from bits sold will get put to the Ford Scorpio Forum because (as I'm sure that you will all agree) it is a fantastic resource for us.
|
|
IP Logged |
|
|
|
scorpio_man
Administrator
![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif)
![](http://img.photobucket.com/albums/v521/scorpio_man/scotland_royal_banner_fl_md_clr.gif)
Ford Kuga awd
![Email](https://www.fordscorpio.co.uk/YaBBImages/email.gif)
Posts: 5654
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: Breaking a 2.3 Ultima saloon
« Reply #1 on: Oct 22nd, 2008, 9:38pm » |
Quote Modify
|
pm sent
|
|
IP Logged |
|
|
|
supatall
Newbie
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/redcreature.gif) So many cars, so little time....
Posts: 12
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: Breaking a 2.3 Ultima saloon
« Reply #2 on: Oct 26th, 2008, 8:46pm » |
Quote Modify
|
Hi I might need an inlet manifold. (Big. black plastic on top left of engine as you look at with the bonnet up. All the fuel injection system is bolted to it) Whereabouts are you? Rgds Simon
|
|
IP Logged |
|
|
|
r33per
Junior Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/linux.gif) 1998 S Reg 2.3 Ultima Saloon
Posts: 72
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: Breaking a 2.3 Ultima saloon
« Reply #3 on: Oct 26th, 2008, 10:22pm » |
Quote Modify
|
PM sent.
|
|
IP Logged |
|
|
|
steve_500uk
Junior Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/fredflinstone.gif) 1995 N Reg Scorpio Ultima
Posts: 52
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: Breaking a 2.3 Ultima saloon
« Reply #4 on: Oct 27th, 2008, 3:06pm » |
Quote Modify
|
Have you got the air con compressor still or would it be the same as a 2.0 l engine? Steve
|
|
IP Logged |
|
|
|
r33per
Junior Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/linux.gif) 1998 S Reg 2.3 Ultima Saloon
Posts: 72
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: Breaking a 2.3 Ultima saloon
« Reply #5 on: Oct 27th, 2008, 3:45pm » |
Quote Modify
|
Steve, Not sure, I'm afraid, although I should expect so. Can you guide me to what I am looking for? Cheers.
|
|
IP Logged |
|
|
|
steve_500uk
Junior Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/fredflinstone.gif) 1995 N Reg Scorpio Ultima
Posts: 52
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: Breaking a 2.3 Ultima saloon
« Reply #6 on: Oct 27th, 2008, 6:17pm » |
Quote Modify
|
if you stand facing the engine, on your right hand side low down at the front with a pully on the front of it attached to a drive belt is the a/c compressor, Steve
|
|
IP Logged |
|
|
|
r33per
Junior Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/linux.gif) 1998 S Reg 2.3 Ultima Saloon
Posts: 72
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: Breaking a 2.3 Ultima saloon
« Reply #7 on: Oct 27th, 2008, 6:29pm » |
Quote Modify
|
Steve, Should have it: I'll check and get back to you.
|
|
IP Logged |
|
|
|
Highlander
Moderator Expert
![*](https://www.fordscorpio.co.uk/YaBBImages/starmod.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/starmod.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/starmod.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/starmod.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/starmod.gif)
![](http://i1001.photobucket.com/albums/af132/CharlieSloan/Flags/Scotland.gif)
13 Scorpios, XR4x4, Suzuki SJ413 for off road :)
![Email](https://www.fordscorpio.co.uk/YaBBImages/email.gif)
Posts: 8244
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: Breaking a 2.3 Ultima saloon
« Reply #8 on: Oct 27th, 2008, 6:30pm » |
Quote Modify
|
But bear in mind it is ILLEGAL as well as dangerous to your health to release the gas in the system into the atmosphere
|
|
IP Logged |
![](http://i8.tinypic.com/2qvxssl.gif)
on Oct 17th, 2011, 12:35pm, Simmo wrote:I give up ! Too much for an old boy! |
|
|
|
|
r33per
Junior Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/linux.gif) 1998 S Reg 2.3 Ultima Saloon
Posts: 72
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: Breaking a 2.3 Ultima saloon
« Reply #9 on: Nov 8th, 2008, 10:18am » |
Quote Modify
|
Wow: didn't realise that. Thanks, mate. Getting Started on the motor today, folks.
|
|
IP Logged |
|
|
|
Jonnycab
Senior Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](http://i70.photobucket.com/albums/i101/jonnycab/JP_nitrous.gif)
Former owner of 2.3 Ultima Facelift saloon
Posts: 3900
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: Breaking a 2.3 Ultima saloon
« Reply #10 on: Nov 8th, 2008, 12:22pm » |
Quote Modify
|
on Oct 27th, 2008, 6:30pm, Highlander wrote:But bear in mind it is ILLEGAL as well as dangerous to your health to release the gas in the system into the atmosphere |
| Who's gonna know ?
|
|
IP Logged |
|
|
|
r33per
Junior Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/linux.gif) 1998 S Reg 2.3 Ultima Saloon
Posts: 72
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: Breaking a 2.3 Ultima saloon
« Reply #11 on: Nov 8th, 2008, 1:34pm » |
Quote Modify
|
Well, you would if you inhale enough of it...
|
|
IP Logged |
|
|
|
Highlander
Moderator Expert
![*](https://www.fordscorpio.co.uk/YaBBImages/starmod.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/starmod.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/starmod.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/starmod.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/starmod.gif)
![](http://i1001.photobucket.com/albums/af132/CharlieSloan/Flags/Scotland.gif)
13 Scorpios, XR4x4, Suzuki SJ413 for off road :)
![Email](https://www.fordscorpio.co.uk/YaBBImages/email.gif)
Posts: 8244
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: Breaking a 2.3 Ultima saloon
« Reply #12 on: Nov 8th, 2008, 6:53pm » |
Quote Modify
|
And its fluorescent green! lol You getting much of it sold??
|
|
IP Logged |
![](http://i8.tinypic.com/2qvxssl.gif)
on Oct 17th, 2011, 12:35pm, Simmo wrote:I give up ! Too much for an old boy! |
|
|
|
|
r33per
Junior Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/linux.gif) 1998 S Reg 2.3 Ultima Saloon
Posts: 72
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: Breaking a 2.3 Ultima saloon
« Reply #13 on: Nov 8th, 2008, 10:28pm » |
Quote Modify
|
Not much so far: I'll blame the economy
|
|
IP Logged |
|
|
|
Jonnycab
Senior Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](http://i70.photobucket.com/albums/i101/jonnycab/JP_nitrous.gif)
Former owner of 2.3 Ultima Facelift saloon
Posts: 3900
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: Breaking a 2.3 Ultima saloon
« Reply #14 on: Nov 9th, 2008, 12:27am » |
Quote Modify
|
The actual gas isn't green, it's the fluid that is dyed green. If you release the gas pressure from the low pressure valve then it will only hiss into the atmosphere...... Don't look over it though, otherwise your eyeballs will freeze
|
|
IP Logged |
|
|
|
gozz
Senior Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/blank.gif) Been around awhile
![Email](https://www.fordscorpio.co.uk/YaBBImages/email.gif)
Posts: 3475
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: Breaking a 2.3 Ultima saloon
« Reply #15 on: Nov 9th, 2008, 11:52am » |
Quote Modify
|
Hissing into the atmosphere eh ! conjours up many happy thoughts ! Beware of the gas police who may be lurking round the corner to slap some atmospheric pressure on you GOZZ.
|
|
IP Logged |
|
|
|
twinturbo
Full Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](http://www.rob1tt.f2s.com/Images/newav.jpg)
24V's Me game!
Posts: 904
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: Breaking a 2.3 Ultima saloon
« Reply #16 on: Jan 4th, 2009, 9:05pm » |
Quote Modify
|
Engine?
|
|
IP Logged |
|
|
|
r33per
Junior Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/linux.gif) 1998 S Reg 2.3 Ultima Saloon
Posts: 72
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: Breaking a 2.3 Ultima saloon
« Reply #17 on: Jan 5th, 2009, 8:58pm » |
Quote Modify
|
You want the engine
|
|
IP Logged |
|
|
|
twinturbo
Full Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](http://www.rob1tt.f2s.com/Images/newav.jpg)
24V's Me game!
Posts: 904
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: Breaking a 2.3 Ultima saloon
« Reply #18 on: Jan 5th, 2009, 9:12pm » |
Quote Modify
|
It would depend on price, location and condition... I am guessing your not able to remove it yourself. TT
|
|
IP Logged |
|
|
|
Highlander
Moderator Expert
![*](https://www.fordscorpio.co.uk/YaBBImages/starmod.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/starmod.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/starmod.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/starmod.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/starmod.gif)
![](http://i1001.photobucket.com/albums/af132/CharlieSloan/Flags/Scotland.gif)
13 Scorpios, XR4x4, Suzuki SJ413 for off road :)
![Email](https://www.fordscorpio.co.uk/YaBBImages/email.gif)
Posts: 8244
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: Breaking a 2.3 Ultima saloon
« Reply #19 on: Jan 5th, 2009, 9:34pm » |
Quote Modify
|
Peterheed
|
|
IP Logged |
![](http://i8.tinypic.com/2qvxssl.gif)
on Oct 17th, 2011, 12:35pm, Simmo wrote:I give up ! Too much for an old boy! |
|
|
|
|
|