Author |
Topic: 1995 2 Litre Parts UPDATED 12/02 (Read 2720 times) |
|
pete from Hull
Senior Member
Non Scorpio at the moment, but still interested...
 
Posts: 1365
|
 |
1995 2 Litre Parts UPDATED 12/02
« on: Nov 12th, 2009, 4:49pm » |
 Quote  Modify
|
I know I said this lot was going to the tip but bad weather delayed it and it is still all available for negociations. As the wether gets better I will need to dispose of it all though as I really need the space.
I am going to check each Friday night for any requests an I'll put the notifier on too. So if you do want anything let me know and I'll do my best to help.
All the gear is in GOOD condition, I even carefully took out the complete main wiring loom and loads of silly bits you wouldn't even normally bother with.
Maroon paintwork model.
Full set wheels and spare with good tyres (teardrop variety)
A full main wiring loom carefully taken out during dismantling. off the 95 Saloon Engine cut off not available unless someone wants to rebuild it, I started to but never completed it.
Starter motor
Washer Bottle
Window gear
Seat Belts
Door Locks and wiring etc
Wiper motor complete
Remote (almost new)
Instruments cluster (circa 45k)
Alternator
Pair front struts
2 pair rear springs
complete cylinder head with all the sprockets and drive chains etc
Radiator with oil cooler and fans
Inlet manifold with all the gear
ECU
Door handles (Maroon) window motors, switches locks etc etc
Loadsabitz like relays control gear and switches seat belts and other blarb... 
Contact me with PM for Negotiations....
It will be worth your while if it's worth mine....
Pete
|
|
 IP Logged |
Bring back fair wages.........
|
|
|
leewar
Senior Member
I'm a YaBB newbie!
Posts: 1504
|
 |
Re: 2 Litre Parts ready now....
« Reply #1 on: Nov 12th, 2009, 9:48pm » |
Quote Modify
|
HI, How old is it and how much is the cat. Lee
|
|
IP Logged |
|
|
|
pete from Hull
Senior Member
Non Scorpio at the moment, but still interested...
Posts: 1365
|
|
Re: 2 Litre Parts ready now....
« Reply #2 on: Nov 13th, 2009, 8:02am » |
Quote Modify
|
It's all off a 1995 car and was running sweet before stripping a couple of years ago, you can have it for £20 plus postage and package for my trouble.
I am in HULL should you need to pick up.
Hth
Pete
|
|
IP Logged |
Bring back fair wages.........
|
|
|
pete from Hull
Senior Member
Non Scorpio at the moment, but still interested...
Posts: 1365
|
|
Re: 2 Litre Parts ready now....
« Reply #3 on: Nov 16th, 2009, 6:22am » |
Quote Modify
|
No one wants these bits...? Ok off to the tip with them.... 
Pete
|
|
IP Logged |
Bring back fair wages.........
|
|
|
Chris_Basel
Full Member
I'm a YaBB newbie!
Posts: 108
|
|
Re: 2 Litre Parts ready now....
« Reply #4 on: Nov 16th, 2009, 1:02pm » |
Quote Modify
|
Anyone with a 2.3 should find the camshafts and inlet manifold useful for a rise in BHP
|
|
IP Logged |
|
|
|
pete from Hull
Senior Member
Non Scorpio at the moment, but still interested...
Posts: 1365
|
|
Re: 2 Litre Parts ready now....
« Reply #5 on: Nov 16th, 2009, 5:28pm » |
Quote Modify
|
afaik the cylinder head is a direct replacement on the 2.3, it was only the engine block that was different, I may put them all on e-bay yet if I can be bothered.
It's such a grind pricing things along with p&p though if you don't get enough to cover the hassle it's not worth it. I have already chucked most of the car away and there was nowt wrong with it when I took it off raod cos I got the 2.3 ... Oh well, They're only car bits afterall....
Pete
|
|
IP Logged |
Bring back fair wages.........
|
|
|
leewar
Senior Member
I'm a YaBB newbie!
Posts: 1504
|
|
Re: 2 Litre Parts ready now....
« Reply #6 on: Nov 16th, 2009, 7:17pm » |
Quote Modify
|
Hi Pete. MOT on Wednesday and I fear a cat problem so I'm hoping you still have it. Lee
|
|
IP Logged |
|
|
|
leewar
Senior Member
I'm a YaBB newbie!
Posts: 1504
|
|
Re: 2 Litre Parts ready now....
« Reply #7 on: Nov 16th, 2009, 7:18pm » |
Quote Modify
|
Could possibly need the remote as I am having trouble with mine. Lee
|
|
IP Logged |
|
|
|
leewar
Senior Member
I'm a YaBB newbie!
Posts: 1504
|
|
Re: 2 Litre Parts ready now....
« Reply #8 on: Nov 18th, 2009, 7:28pm » |
Quote Modify
|
Hi Pete. Could I have the cat please. Need ASAP Thanks Lee
|
|
IP Logged |
|
|
|
nighthawk
Newbie
I'm a YaBB newbie!
Posts: 24
|
|
Re: 2 Litre Parts ready now....
« Reply #9 on: Nov 21st, 2009, 3:35pm » |
Quote Modify
|
hi ya do you have the return fuel pipe that goes into the fuel tank it has the red ends and do you have the fuel cut off loom and how much to post
|
|
IP Logged |
|
|
|
pete from Hull
Senior Member
Non Scorpio at the moment, but still interested...
Posts: 1365
|
|
Re: 2 Litre Parts ready now....
« Reply #10 on: Nov 22nd, 2009, 12:08pm » |
Quote Modify
|
Sorry, both items not available....
Pete
|
|
IP Logged |
Bring back fair wages.........
|
|
|
pete from Hull
Senior Member
Non Scorpio at the moment, but still interested...
Posts: 1365
|
|
Re: 2 Litre Parts ready now....
« Reply #11 on: Nov 22nd, 2009, 12:09pm » |
Quote Modify
|
on Nov 18th, 2009, 7:28pm, lleewar wrote:| Hi Pete. Could I have the cat please. Need ASAP Thanks Lee |
|
As per Telephone chat Lee....
|
|
IP Logged |
Bring back fair wages.........
|
|
|
leewar
Senior Member
I'm a YaBB newbie!
Posts: 1504
|
|
Re: 2 Litre Parts ready now....
« Reply #12 on: Nov 22nd, 2009, 4:23pm » |
Quote Modify
|
Hi Pete, yes please. Let me know how you want payment made. I need it ASAP. Call me if you need to Regards Lee
|
|
IP Logged |
|
|
|
pete from Hull
Senior Member
Non Scorpio at the moment, but still interested...
Posts: 1365
|
|
Re: 2 Litre Parts ready now....
« Reply #13 on: Nov 23rd, 2009, 4:00pm » |
Quote Modify
|
Sorted Lee, see PM
Pete
|
|
IP Logged |
Bring back fair wages.........
|
|
|
leewar
Senior Member
I'm a YaBB newbie!
Posts: 1504
|
|
Re: 2 Litre Parts ready now....
« Reply #14 on: Nov 27th, 2009, 9:42am » |
Quote Modify
|
Hi Pete, Do you have the exhaust manifold by any chance. After taking off the heat shields, I,ve noticed mine has a crack in it. Thanks Lee
|
|
IP Logged |
|
|
|
pete from Hull
Senior Member
Non Scorpio at the moment, but still interested...
Posts: 1365
|
|
Re: 2 Litre Parts ready now....
« Reply #15 on: Nov 30th, 2009, 9:42am » |
Quote Modify
|
on Nov 27th, 2009, 9:42am, lleewar wrote:| Hi Pete, Do you have the exhaust manifold by any chance. After taking off the heat shields, I,ve noticed mine has a crack in it. Thanks Lee |
|
Sorry Lee, that replaced my 2.3 one before I sold it...
|
|
IP Logged |
Bring back fair wages.........
|
|
|
Matt
Senior Member
Manual'd and a 4.0 in the making
Posts: 2816
|
|
Re: 2 Litre Parts ready now....
« Reply #16 on: Dec 6th, 2009, 4:51pm » |
Quote Modify
|
have you got the brake servo?
|
|
IP Logged |
 
FDS2000 Scans - Birmingham
|
|
|
pete from Hull
Senior Member
Non Scorpio at the moment, but still interested...
Posts: 1365
|
|
Re: 2 Litre Parts ready now....
« Reply #17 on: Dec 7th, 2009, 6:56am » |
Quote Modify
|
on Dec 6th, 2009, 4:51pm, Matt wrote:have you got the brake servo?
|
|
Yes  PM details...
Pete
No Pm? No Want?
|
|
IP Logged |
Bring back fair wages.........
|
|
|
myrs200
Newbie
I'm a YaBB newbie!
Posts: 34
|
|
Re: 2 Litre Parts ready now....
« Reply #18 on: Dec 29th, 2009, 2:16pm » |
Quote Modify
|
Hi Pete
have you got the diff? ratio?
mick
|
|
IP Logged |
|
|
|
pete from Hull
Senior Member
Non Scorpio at the moment, but still interested...
Posts: 1365
|
|
Re: 2 Litre Parts ready now....
« Reply #19 on: Dec 31st, 2009, 12:30pm » |
Quote Modify
|
on Dec 29th, 2009, 2:16pm, myrs200 wrote:Hi Pete
have you got the diff? ratio?
mick |
|
No Diff, sold to thunderchild, sorry pete
|
|
IP Logged |
Bring back fair wages.........
|
|
|
|
Home
Help
Search
Members
Login
Reply
Send Topic
Print