Author |
Topic: gasket (Read 320 times) |
|
VSBlue
Junior Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/tigger.gif) scorpio 2.9 v6 12v Saloon
![Email](https://www.fordscorpio.co.uk/YaBBImages/email.gif)
Posts: 69
|
i am looking for a gasket ford part number 6134390 the gasket gose front engine from block to water pump but not the water pump gasket the one behind the spacer if i can get a picture i will add to post the car is scorpio 2.9 v6 12valve auto 1996 N reg
|
|
IP Logged |
|
|
|
Spannerdemon
Guest
![Email](https://www.fordscorpio.co.uk/YaBBImages/email.gif)
|
Don't know if this will help you, but if it's a simple 'paper type' gasket, then most accessory shops sell Gasket paper in various thicknesses from which you can cut your own gaskets. You can get hole punches very cheaply from most discount tool shops too. I've got a set which cost about 2 quid, and they have been one of the most useful additions to my toolbox. I regularly make my own gaskets using the above paper and hole punches. There are also a number of 'instant gasket' type sealants which will form a joint between two surfaces. Have a word with your accessory shop. Of course you can always get the gasket from Ford.
|
|
IP Logged |
|
|
|
|