Author |
Topic: ABS PUMP (Read 598 times) |
|
cleave
Junior Member
am i bovered!
Posts: 89
|
Hi peeps need an abs pump for my r reg 2.3 ultima.Light wont go out and diagnostics giving code abs pump failure.Been told its an mot failure like this.Also if anyone can fit one cheaper than my local garage the job is your.......ahhhhh please hellllppppp meeee
|
|
IP Logged |
|
|
|
armatec
Full Member
ONE DAY I WILL UNDERSTAND THESE CARS!
Posts: 185
|
|
Re: ABS PUMP
« Reply #1 on: Feb 1st, 2007, 7:18am » |
Quote Modify
|
that the same pump as the 2L M regultima? if so i got one £60 inc p+p part number 95GB-2M110-AC
|
|
IP Logged |
1997 2.3 ULTIMA ESTATE
|
|
|
Highlander
Moderator Expert
13 Scorpios, XR4x4, Suzuki SJ413 for off road :)
Posts: 8244
|
|
Re: ABS PUMP
« Reply #2 on: Feb 1st, 2007, 8:59am » |
Quote Modify
|
There is a part number on it, make sure you get one with the same number, there are lots of different types
|
|
IP Logged |
on Oct 17th, 2011, 12:35pm, Simmo wrote:I give up ! Too much for an old boy! |
|
|
|
|
cleave
Junior Member
am i bovered!
Posts: 89
|
|
Re: ABS PUMP
« Reply #3 on: Feb 1st, 2007, 10:52am » |
Quote Modify
|
hi armatec,we spoke on ebay remember under name vicky.What is the best way to find out if they r compatible.I wouldnt know what im looking for.Would it make more sence to get someone to take old one off first and once off can i still use the car ?...keep it for me for a while if u can until we find out if its the same pump much appriciated if u can.Anyone any idea how much this will cost to fit? omg
|
|
IP Logged |
|
|
|
armatec
Full Member
ONE DAY I WILL UNDERSTAND THESE CARS!
Posts: 185
|
|
Re: ABS PUMP
« Reply #4 on: Feb 1st, 2007, 11:45am » |
Quote Modify
|
lol had a feeling it was you im glad you found your way to this site , everyone very friendly and nice.. well no one shouted at me yet have a look under the bonnet, it says the part number right on the top of the, you shouldnt need to take it off to see the number.. take a pen and paper with ya not sure about how much to fit? i got a nice brother that does all my stuff you should be looking for something like this lol
|
|
IP Logged |
1997 2.3 ULTIMA ESTATE
|
|
|
cleave
Junior Member
am i bovered!
Posts: 89
|
|
Re: ABS PUMP
« Reply #5 on: Feb 1st, 2007, 12:00pm » |
Quote Modify
|
thanks m8 but which bit is it the black thingy? hahhah
|
|
IP Logged |
|
|
|
armatec
Full Member
ONE DAY I WILL UNDERSTAND THESE CARS!
Posts: 185
|
|
Re: ABS PUMP
« Reply #6 on: Feb 1st, 2007, 12:10pm » |
Quote Modify
|
inner yellow is pump.. inner red is part number.. helps??
|
|
IP Logged |
1997 2.3 ULTIMA ESTATE
|
|
|
cleave
Junior Member
am i bovered!
Posts: 89
|
|
Re: ABS PUMP
« Reply #7 on: Feb 1st, 2007, 12:27pm » |
Quote Modify
|
seems its the wrong one m8 if anyone can match these numbers u would be saving a scorp and win a prize...anyone sorce me one and i will love u forever will even make a donation to the site plus a good drink for winner..heres mine
|
|
IP Logged |
|
|
|
cleave
Junior Member
am i bovered!
Posts: 89
|
|
Re: ABS PUMP
« Reply #8 on: Feb 1st, 2007, 1:05pm » |
Quote Modify
|
thanks all for your fast responce and thanks to armatec for your efforts and highlander for finding the part i need.Ive paid for the part and await delivery.Is fitting a new abs pump a headache and will my warning light go out once its done?......great stuff onwards and upwards might treat the scorp to a full sevice after her operation
|
|
IP Logged |
|
|
|
armatec
Full Member
ONE DAY I WILL UNDERSTAND THESE CARS!
Posts: 185
|
|
Re: ABS PUMP
« Reply #9 on: Feb 1st, 2007, 1:24pm » |
Quote Modify
|
good job you didnt buy one from ebay then Cleave.. good highlander lol never fitted one before, only took them off, i know its sneeky but i took the screen off the dash once and stuck black insulating tape over the light to get it through the MOT.. wasnt a scorp it was the Wifes car but it worked until we had the time to get it done
|
|
IP Logged |
1997 2.3 ULTIMA ESTATE
|
|
|
cleave
Junior Member
am i bovered!
Posts: 89
|
|
Re: ABS PUMP
« Reply #10 on: Feb 1st, 2007, 2:35pm » |
Quote Modify
|
i did think of that one too trouble is it has to come on for 3 seconds then go out ...out perminantly will bring it on top.... never mind anyway part is a cominnn
|
|
IP Logged |
|
|
|
Highlander
Moderator Expert
13 Scorpios, XR4x4, Suzuki SJ413 for off road :)
Posts: 8244
|
|
Re: ABS PUMP
« Reply #11 on: Feb 1st, 2007, 11:06pm » |
Quote Modify
|
You can always wire the ABS light to the washer bottle level switch
|
|
IP Logged |
on Oct 17th, 2011, 12:35pm, Simmo wrote:I give up ! Too much for an old boy! |
|
|
|
|
Scorpius
Full Member
95 Cossie in metalic Green. 96 Cossie in red
Posts: 357
|
|
Re: ABS PUMP
« Reply #12 on: Feb 3rd, 2007, 11:19am » |
Quote Modify
|
The picture from Armatec shows a Teves MK 7 and is the early type that does NOT store codes. The picture from Cleave shows a Teves MK 20 that does store codes. Either way, a good unit with no codes should sort the light as long as the sensors are OK. As far as i am aware, these are the only two units and as long as you get the right one you will be OK. I changed one a few months ago, and the job is easy, BUT you will have to bleed ALL the brakes after fitting . It took me about 2 hours from start to finish. Ian
|
|
IP Logged |
|
|
|
cleave
Junior Member
am i bovered!
Posts: 89
|
|
Re: ABS PUMP
« Reply #13 on: Feb 3rd, 2007, 3:52pm » |
Quote Modify
|
ok cool tnx wanna do mine?
|
|
IP Logged |
|
|
|
Scorpius
Full Member
95 Cossie in metalic Green. 96 Cossie in red
Posts: 357
|
|
Re: ABS PUMP
« Reply #14 on: Feb 3rd, 2007, 4:53pm » |
Quote Modify
|
Where are you located?
|
|
IP Logged |
|
|
|
cleave
Junior Member
am i bovered!
Posts: 89
|
|
Re: ABS PUMP
« Reply #15 on: Feb 3rd, 2007, 11:40pm » |
Quote Modify
|
lol northampton m8...dont mind travelling can bring some sarnies and a flask of soup..even pump the brake pedal if need be
|
|
IP Logged |
|
|
|
Scorpius
Full Member
95 Cossie in metalic Green. 96 Cossie in red
Posts: 357
|
|
Re: ABS PUMP
« Reply #16 on: Feb 4th, 2007, 12:03pm » |
Quote Modify
|
Will pm you as well. I am between Loughborough and Nottingham. just off M1 j24 (East Leake) if you fancy popping up here this afternoon, make sure you have 1/2 litre of break fluid. 07967 488897 Ian
|
|
IP Logged |
|
|
|
cleave
Junior Member
am i bovered!
Posts: 89
|
|
Re: ABS PUMP
« Reply #17 on: Feb 4th, 2007, 9:30pm » |
Quote Modify
|
sorry ian been rushed off my feet today only just got your reply m8.Can come np at your convienience...how much r ya gonna charge me bearing in mind im a poorpa lol
|
|
IP Logged |
|
|
|
Scorpius
Full Member
95 Cossie in metalic Green. 96 Cossie in red
Posts: 357
|
|
Re: ABS PUMP
« Reply #18 on: Feb 4th, 2007, 9:40pm » |
Quote Modify
|
I have had a weekend working on the cars anyway, so it seemed a good idea to help you run through it. Labour is free if i offer the time. (Parts are another matter) lol Evenings are a bit dark at the mo so pick a day next weekend and bring her up for some surgery. Ian
|
|
IP Logged |
|
|
|
cleave
Junior Member
am i bovered!
Posts: 89
|
|
Re: ABS PUMP
« Reply #19 on: Feb 5th, 2007, 11:57am » |
Quote Modify
|
Great stuff ian,is sunday about miday ok for u m8...if so can u pm me your full address...look forward to meeting u
|
|
IP Logged |
|
|
|
|