Author |
Topic: Idle air control valve for 2.3 (Read 674 times) |
|
Mike_Floutier
Full Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/blank.gif) '97 2.3 Ultima saloon lpg
![Email](https://www.fordscorpio.co.uk/YaBBImages/email.gif)
Posts: 296
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Idle air control valve for 2.3
« on: Dec 10th, 2007, 10:16pm » |
Quote Modify
|
Hi all, I'm also desperate for an IACV for my 2.3 as my present one seems to be going downhill. Thanks Mike
|
|
IP Logged |
|
|
|
Highlander
Moderator Expert
![*](https://www.fordscorpio.co.uk/YaBBImages/starmod.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/starmod.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/starmod.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/starmod.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/starmod.gif)
![](http://i1001.photobucket.com/albums/af132/CharlieSloan/Flags/Scotland.gif)
13 Scorpios, XR4x4, Suzuki SJ413 for off road :)
![Email](https://www.fordscorpio.co.uk/YaBBImages/email.gif)
Posts: 8244
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: Idle air control valve for 2.3
« Reply #1 on: Dec 10th, 2007, 10:20pm » |
Quote Modify
|
Same as the 2.0 isnt it? I should have another one, will check tomorrow
|
|
IP Logged |
![](http://i8.tinypic.com/2qvxssl.gif)
on Oct 17th, 2011, 12:35pm, Simmo wrote:I give up ! Too much for an old boy! |
|
|
|
|
Tompion
Administrator
![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif)
![](http://i.imgur.com/YwLOTZk.jpg)
1997 2.3 Ultima estate.
Posts: 2918
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: Idle air control valve for 2.3
« Reply #2 on: Dec 10th, 2007, 11:00pm » |
Quote Modify
|
Don't think the 2.0 will fit the 2.3. I've not tried, but the the plug comes off at a different angle to avoid part of the manifold.
|
|
IP Logged |
ABS multiplug wheel sensor pins MK IV or MK 20
|
|
|
Highlander
Moderator Expert
![*](https://www.fordscorpio.co.uk/YaBBImages/starmod.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/starmod.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/starmod.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/starmod.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/starmod.gif)
![](http://i1001.photobucket.com/albums/af132/CharlieSloan/Flags/Scotland.gif)
13 Scorpios, XR4x4, Suzuki SJ413 for off road :)
![Email](https://www.fordscorpio.co.uk/YaBBImages/email.gif)
Posts: 8244
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: Idle air control valve for 2.3
« Reply #3 on: Dec 10th, 2007, 11:33pm » |
Quote Modify
|
Yep finis numbers are different, sorry cant help then
|
|
IP Logged |
![](http://i8.tinypic.com/2qvxssl.gif)
on Oct 17th, 2011, 12:35pm, Simmo wrote:I give up ! Too much for an old boy! |
|
|
|
|
Mike_Floutier
Full Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/blank.gif) '97 2.3 Ultima saloon lpg
![Email](https://www.fordscorpio.co.uk/YaBBImages/email.gif)
Posts: 296
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: Idle air control valve for 2.3
« Reply #4 on: Dec 11th, 2007, 11:45am » |
Quote Modify
|
It's interesting, I've read this myth that the 2.0 IACV wont fit the 2.3 because of the new shape of the manifold and I had believed it (as you do). However, because I didn't want to pay the £80 odd for a new 2.3 one, I picked up one with a straight connector on ebay; the part no. is 95BF-9F715-AC (I dont know the finis) - see http://cgi.ebay.co.uk/IDLE-SPEED-CONTROL-VALVE-FORD-FIESTA-ESCORT-KA-MON DEO_W0QQitemZ260189906279QQihZ016QQcategoryZ21654QQtcZphotoQQcmdZViewItem. Well, it's true that if you fit it then you cant connect the plug as it fouls the manifold BUT if you connect the plug first and THEN fit it it does go. The bad news however was that, although it was new, it worked worse than my existing 300,000 miles old one - lol! Anyway, I'm wondering if, since it says it's for a Fiesta, KA etc, that's why it doesn't work well enough. Finally, HIGHLANDER, since I now know that your 2.0 Scorpio valve will fit my 2.3, would you mind sending it on the understanding that I'll post it straight back if it doesn't work. Thanks Mike
|
|
IP Logged |
|
|
|
Highlander
Moderator Expert
![*](https://www.fordscorpio.co.uk/YaBBImages/starmod.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/starmod.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/starmod.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/starmod.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/starmod.gif)
![](http://i1001.photobucket.com/albums/af132/CharlieSloan/Flags/Scotland.gif)
13 Scorpios, XR4x4, Suzuki SJ413 for off road :)
![Email](https://www.fordscorpio.co.uk/YaBBImages/email.gif)
Posts: 8244
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: Idle air control valve for 2.3
« Reply #5 on: Dec 11th, 2007, 7:12pm » |
Quote Modify
|
No probs, pm me your address, and if it doesnt work you can keep it
|
|
IP Logged |
![](http://i8.tinypic.com/2qvxssl.gif)
on Oct 17th, 2011, 12:35pm, Simmo wrote:I give up ! Too much for an old boy! |
|
|
|
|
Highlander
Moderator Expert
![*](https://www.fordscorpio.co.uk/YaBBImages/starmod.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/starmod.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/starmod.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/starmod.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/starmod.gif)
![](http://i1001.photobucket.com/albums/af132/CharlieSloan/Flags/Scotland.gif)
13 Scorpios, XR4x4, Suzuki SJ413 for off road :)
![Email](https://www.fordscorpio.co.uk/YaBBImages/email.gif)
Posts: 8244
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: Idle air control valve for 2.3
« Reply #6 on: Dec 13th, 2007, 12:19am » |
Quote Modify
|
Helloooo Mike, address?
|
|
IP Logged |
![](http://i8.tinypic.com/2qvxssl.gif)
on Oct 17th, 2011, 12:35pm, Simmo wrote:I give up ! Too much for an old boy! |
|
|
|
|
Mike_Floutier
Full Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/blank.gif) '97 2.3 Ultima saloon lpg
![Email](https://www.fordscorpio.co.uk/YaBBImages/email.gif)
Posts: 296
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: Idle air control valve for 2.3
« Reply #7 on: Dec 13th, 2007, 7:57am » |
Quote Modify
|
I did send it using the "mail" button but I guess it didn't work for some reason, sorry. It's: i've pm'd your address to stuart. Thanks Mike
|
|
IP Logged |
|
|
|
Highlander
Moderator Expert
![*](https://www.fordscorpio.co.uk/YaBBImages/starmod.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/starmod.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/starmod.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/starmod.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/starmod.gif)
![](http://i1001.photobucket.com/albums/af132/CharlieSloan/Flags/Scotland.gif)
13 Scorpios, XR4x4, Suzuki SJ413 for off road :)
![Email](https://www.fordscorpio.co.uk/YaBBImages/email.gif)
Posts: 8244
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: Idle air control valve for 2.3
« Reply #8 on: Dec 16th, 2007, 9:04pm » |
Quote Modify
|
On its way
|
|
IP Logged |
![](http://i8.tinypic.com/2qvxssl.gif)
on Oct 17th, 2011, 12:35pm, Simmo wrote:I give up ! Too much for an old boy! |
|
|
|
|
Mike_Floutier
Full Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/blank.gif) '97 2.3 Ultima saloon lpg
![Email](https://www.fordscorpio.co.uk/YaBBImages/email.gif)
Posts: 296
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: Idle air control valve for 2.3
« Reply #9 on: Dec 16th, 2007, 10:04pm » |
Quote Modify
|
Many thanks, will let you know how it goes! Mike
|
|
IP Logged |
|
|
|
|