Author |
Topic: Door pillar ultrasonic movement sensors (Read 451 times) |
|
adzst24
Junior Member
OH NO! Im sure this bit goes back somewhere ?
Posts: 82
|
 |
Door pillar ultrasonic movement sensors
« on: Mar 19th, 2008, 9:11am » |
 Quote  Modify
|
Hi all
Im trying to get a set of the sensors for the alarm as these are not on my estate but i do have the glass break on the rear windows i have been informed that the sensors where a cost option im also looking for the plastic covers for the pillar that they are fitted too (in the cream type colour?)
thanks in advance for the help
regards
Adam. 
|
|
 IP Logged |
|
|
|
pete from Hull
Senior Member
Non Scorpio at the moment, but still interested...
Posts: 1365
|
|
Re: Door pillar ultrasonic movement sensors
« Reply #1 on: Mar 19th, 2008, 10:04pm » |
Quote Modify
|
I used to have these in my 93 K Reg 2lt Granny, try looking in the scrappies yards.....
hth
Pete
|
|
IP Logged |
Bring back fair wages.........
|
|
|
Baz
Moderator
Senior Member
S Reg. 1998 24v Cosworth S2.9 COS (Deceased)
Posts: 4009
|
|
Re: Door pillar ultrasonic movement sensors
« Reply #2 on: Mar 19th, 2008, 11:36pm » |
Quote Modify
|
the ones in the door pillar are on the Mondeos aren't they? I thought the Granada and Scorpio estates had the same ones as the saloon which are a seperate unit above the door pillar plastic and fitted to a plastic mounting below the headlining with a hole in the lining for the unit to fit into?
|
|
IP Logged |
|
|
|
Snoopy
Administrator
Very old.BAD tempered and missing friends.
Posts: 6278
|
|
Re: Door pillar ultrasonic movement sensors
« Reply #3 on: Mar 20th, 2008, 7:56am » |
Quote Modify
|
I have a set of ultra sonic sensors some where in my BOX of spares .. will try to dig them out later and post a picture for you .
|
|
IP Logged |
HELP the FORUM.Please DONATE
|
|
|
pete from Hull
Senior Member
Non Scorpio at the moment, but still interested...
Posts: 1365
|
|
Re: Door pillar ultrasonic movement sensors
« Reply #4 on: Mar 20th, 2008, 8:58am » |
Quote Modify
|
Mine were mounted just behind the door pillar, these were fitted as a cost option on these models, I never took much notice of them but when I sold the car, the new owner was quite taken up with them, somewhat new technology back then maybe....
I would think that if they are fitted to Mondeos they will probably fit the scorp too, unless snoopy has some.....
hth
pete
|
|
IP Logged |
Bring back fair wages.........
|
|
|
pete from Hull
Senior Member
Non Scorpio at the moment, but still interested...
Posts: 1365
|
|
Re: Door pillar ultrasonic movement sensors
« Reply #5 on: Mar 20th, 2008, 9:03am » |
Quote Modify
|
Further to above, when I stripped my 2lt Scorp 95 I don't recall any wireing being available in the roof lining for these units which I would have thought being an option there would have been, I may be wrong but maybe it isn't an available addon for the Scorp, thus would have to be wired in...
It is however a surprisingly simple job to drop the headlining down to have a look/Fit sensors.
Would be interesting...
Pete
|
|
IP Logged |
Bring back fair wages.........
|
|
|
Scorpio_Mike
Senior Member
Jeep Grand Cherokee 3.0 V6 & 2.8 Sierra XR4i 4x4
Posts: 2354
|
|
Re: Door pillar ultrasonic movement sensors
« Reply #6 on: Mar 20th, 2008, 11:51am » |
Quote Modify
|
I've wondered about retro-fitting these myself but as Pete says, if the wiring ain't there, maybe this is not possible.
I know my '93 Granada Scorpio estate had them.
From previous Fords, usually the main loom has all the wiring in place for all available options and then parts are connected using smaller separate looms.
My XR4i didn't originally have central locking or electric windows but the connections were all there on the main loom - couple of trips to a breakers yard for all the parts including relevant looms and hey presto - factory fit options !
|
|
IP Logged |
Star sign is Scorpio !
Sierra XR4i's are great...especially when fitted with 4WD
|
|
|
Snoopy
Administrator
Very old.BAD tempered and missing friends.
Posts: 6278
|
|
Re: Door pillar ultrasonic movement sensors
« Reply #7 on: Mar 20th, 2008, 5:36pm » |
Quote Modify
|
OK I have the wiring loom and the two sensors ...
What are they worth ?
|
|
IP Logged |
HELP the FORUM.Please DONATE
|
|
|
adzst24
Junior Member
OH NO! Im sure this bit goes back somewhere ?
Posts: 82
|
|
Re: Door pillar ultrasonic movement sensors
« Reply #8 on: Mar 24th, 2008, 2:01pm » |
Quote Modify
|
thanks all have sourced a set from a friends uncle so will give it a try ??
ps.. thanks for the offer Snoopy
|
|
IP Logged |
|
|
|
Snoopy
Administrator
Very old.BAD tempered and missing friends.
Posts: 6278
|
|
Re: Door pillar ultrasonic movement sensors
« Reply #9 on: Mar 24th, 2008, 2:28pm » |
Quote Modify
|
Back into the spares box then...
|
|
IP Logged |
HELP the FORUM.Please DONATE
|
|
|
Gerhard
Newbie
I'm a YaBB newbie!
Posts: 5
|
|
Re: Door pillar ultrasonic movement sensors
« Reply #10 on: Mar 30th, 2008, 8:48pm » |
Quote Modify
|
Snoopy,
If you can tell me how to fit these sensors to the excisting wiring loom, I would like to buy them.
Please let me know your price. They have to be shipped to the Netherlands. Can I pay by PayPal?
Best regards,
Gerhard.
|
|
IP Logged |
|
|
|
Snoopy
Administrator
Very old.BAD tempered and missing friends.
Posts: 6278
|
|
Re: Door pillar ultrasonic movement sensors
« Reply #11 on: Mar 31st, 2008, 7:44am » |
Quote Modify
|
They just plug into the existing Alarm system as far as I am aware .
The brackets for fitting to the top of the door pillars are not with it ( There should be two I only have one )
Make me an offer including postage to EU and I will consider . I will check weight and postage costs to Eu for you.
|
|
IP Logged |
HELP the FORUM.Please DONATE
|
|
|
|
Home
Help
Search
Members
Login
Reply
Send Topic
Print