Author |
Topic: plastic caps for bumper headlight washers (Read 635 times) |
|
budgie
Newbie
I'm a YaBB newbie!
Posts: 48
|
 |
plastic caps for bumper headlight washers
« on: Apr 2nd, 2009, 1:40am » |
 Quote  Modify
|
Hi to everyone ,would anyone have any of the plastic covers for the headlight washers?i have tried to buy them but apparently they are only supplied with the whole washer assembly which i dont need but if i cannot get the plastic caps on their own i will have to buy them which may seem daft but i would like to keep things working and looking as they should.
|
|
 IP Logged |
|
|
|
Simmo
Administrator
I'm an OAP !
Posts: 5508
|
|
Re: plastic caps for bumper headlight washers
« Reply #1 on: Apr 2nd, 2009, 1:11pm » |
Quote Modify
|
Budgie, these are as rare as hens teeth but in the past one member did manage to make some. Just one point. You need to state if the car has a 'facelift' bumper or the earlier one as the shape is different and the washer caps are moulded accordingly.......just to add to the problem of finding them!! 
|
|
IP Logged |
Now I'm an OAP
|
|
|
Scorpio
Full Member
Posts: 562
|
|
Re: plastic caps for bumper headlight washers
« Reply #2 on: Apr 2nd, 2009, 1:46pm » |
Quote Modify
|
on Apr 2nd, 2009, 1:40am, budgie wrote:| Hi to everyone ,would anyone have any of the plastic covers for the headlight washers?i have tried to buy them but apparently they are only supplied with the whole washer assembly which i dont need but if i cannot get the plastic caps on their own i will have to buy them which may seem daft but i would like to keep things working and looking as they should. |
|
+ 1
I also require two plastic cap covers for the headlight washers.
My bumper is the "facelifted" model.
I wait in hope 
|
|
IP Logged |
|
|
|
Highlander
Moderator
Expert
13 Scorpios, XR4x4, Suzuki SJ413 for off road :)
Posts: 8244
|
|
Re: plastic caps for bumper headlight washers
« Reply #3 on: Apr 2nd, 2009, 3:35pm » |
Quote Modify
|
there are two different facelift versions 
|
|
IP Logged |
on Oct 17th, 2011, 12:35pm, Simmo wrote:| I give up ! Too much for an old boy! |
|
|
|
|
budgie
Newbie
I'm a YaBB newbie!
Posts: 48
|
|
Re: plastic caps for bumper headlight washers
« Reply #4 on: Apr 2nd, 2009, 3:37pm » |
Quote Modify
|
hi all mines the new facelft bumper.i do still have both caps but the little teeth on one of them got squashed so obviously will not push on .the other one looks ok.would anyone know if the squahed one could bwe put on any other way?(some sort of adhesive?excuse my ignorance!)
|
|
IP Logged |
|
|
|
budgie
Newbie
I'm a YaBB newbie!
Posts: 48
|
|
Re: plastic caps for bumper headlight washers
« Reply #5 on: Apr 2nd, 2009, 4:07pm » |
Quote Modify
|
hi again i didnt know there were 2 facelift bumpers,mine is an s reg 24v.ultima.so i presume it would be the latest facelift.
|
|
IP Logged |
|
|
|
Scorpio
Full Member
Posts: 562
|
|
Re: plastic caps for bumper headlight washers
« Reply #6 on: Apr 2nd, 2009, 8:41pm » |
Quote Modify
|
on Apr 2nd, 2009, 3:35pm, Highlander wrote:| there are two different facelift versions |
|
Is that bumpers or headlight washer caps ? 
Highlander what's the difference between the two types !
|
|
IP Logged |
|
|
|
Baz
Moderator
Senior Member
S Reg. 1998 24v Cosworth S2.9 COS (Deceased)
Posts: 4009
|
|
Re: plastic caps for bumper headlight washers
« Reply #7 on: Apr 3rd, 2009, 8:34am » |
Quote Modify
|
The pre facelift bumpers were all the same with regards to the shape of the holes which were cut out for the headlamp washers and so the caps that covered the holes were all the same too.
However, on the facelift bumpers for some reason during the 6 months or so that Ford made them, they changed the shape of the holes and thus the shape of the caps that covered the washers. The final version were more of a square shape with a crease line straight across parrallel to one edge. The first facelift ones had the crease line across one of the corners of the cap.
I will try and find the photos I did the last time this came up!! 
|
|
IP Logged |
|
|
|
ScorpioWorld
Full Member
I'm a YaBB newbie!
Posts: 106
|
|
Re: plastic caps for bumper headlight washers
« Reply #8 on: Apr 15th, 2009, 1:03pm » |
Quote Modify
|
i have got two of these headlight washer bumper caps that i was going to put on ebay, what are they worth?
|
|
IP Logged |
|
|
|
Scorpio
Full Member
Posts: 562
|
|
Re: plastic caps for bumper headlight washers
« Reply #9 on: Apr 15th, 2009, 1:23pm » |
Quote Modify
|
Hi Scorpioworld, can i have first option on these caps please.
Let me know how much you want for them.
Thanks
Adam
|
|
IP Logged |
|
|
|
a900one
Full Member
A scorpio is for life not just for christmas
Posts: 980
|
|
Re: plastic caps for bumper headlight washers
« Reply #10 on: Apr 18th, 2009, 3:48pm » |
Quote Modify
|
When I bought a facelift washer off ebay I was not aware there were two different types and you guessed it I bought the wrong one.  I have a n/s early one, will swop for the latter n/s square one as Baz describes.
|
|
IP Logged |
|
|
|
|
Home
Help
Search
Members
Login
Reply
Send Topic
Print