Author |
Topic: Hose needed (Read 722 times) |
|
wolfblood
Junior Member
I'm a YaBB newbie!
 
Posts: 89
|
 |
Hose needed
« on: Jan 23rd, 2010, 6:59pm » |
 Quote  Modify
|
Hi
I am looking for a new hose for a 24V R reg model.
It is the one that goes from above the thermostat into the water housing in the engine and can be seen as part 12 on the following page on the diagram under cosworth cylinder heads.
http://www.fordscorpio.co.uk/leaks.htm
Please email me at wolfblood@blueyonder.co.uk with any availability.
Cheers
Dean
|
|
 IP Logged |
|
|
|
Matt
Senior Member
Manual'd and a 4.0 in the making
Posts: 2816
|
|
Re: Hose needed
« Reply #1 on: Jan 23rd, 2010, 7:08pm » |
Quote Modify
|
Hi dean
give tons of fun a pm, me and him just broke a cossie engine and he has the parts at his, pretty sure we still have that hose
Matt 
|
|
IP Logged |
 
FDS2000 Scans - Birmingham
|
|
|
Tons_of_fun
Full Member
Mmmm...Xena !
Posts: 978
|
|
Re: Hose needed
« Reply #2 on: Jan 23rd, 2010, 8:19pm » |
Quote Modify
|
99% sure it there SOMEWHERE  . Will have a look in the morning 
|
|
IP Logged |
Lord...Sometimes im not that bright
|
|
|
gozz
Senior Member
Been around awhile
Posts: 3475
|
|
Re: Hose needed
« Reply #3 on: Jan 23rd, 2010, 10:59pm » |
Quote Modify
|
TOF.
Yes it's SOMEWHERE all right  probably still lurking inside the N/S cyl head 
What an invention eh ? if ever there was an afterthought ?
GOZZ.
|
|
IP Logged |
|
|
|
Baz
Moderator
Senior Member
S Reg. 1998 24v Cosworth S2.9 COS (Deceased)
Posts: 4009
|
|
Re: Hose needed
« Reply #4 on: Jan 24th, 2010, 10:26pm » |
Quote Modify
|
That hose is what went on my Cossie and what finally got me to get rid of it and buy the S Class!! The hose isn't available from Ford anymore as a new part, not available from Fordparts and is usually broken on any second hand engine that I found!
|
|
IP Logged |
|
|
|
Tons_of_fun
Full Member
Mmmm...Xena !
Posts: 978
|
|
Re: Hose needed
« Reply #5 on: Jan 25th, 2010, 12:43pm » |
Quote Modify
|
Afraid to report the hose i have in the garage is in VERY poor condition. Sorry 
|
|
IP Logged |
Lord...Sometimes im not that bright
|
|
|
wolfblood
Junior Member
I'm a YaBB newbie!
Posts: 89
|
|
Re: Hose needed
« Reply #6 on: Jan 25th, 2010, 1:04pm » |
Quote Modify
|
Thanks for looking anyway Tons of Fun.
Have given a copy of the diagram from:
http://www.fordscorpio.co.uk/leaks.htm
to a mate who delivers parts to see if he can find anything in any of their catalogues as one of their suppliers managed to find me an exact match for the top hose a bit back.
|
|
IP Logged |
|
|
|
Baz
Moderator
Senior Member
S Reg. 1998 24v Cosworth S2.9 COS (Deceased)
Posts: 4009
|
|
Re: Hose needed
« Reply #7 on: Jan 27th, 2010, 1:54am » |
Quote Modify
|
It is a weird hose because it starts off as a pipe with about 38-40mm diameter and ends up passing through the cylinder head down to about 25mm with a few twists and turns on the way.
Good luck in sourcing one though WB
|
|
IP Logged |
|
|
|
Scorpio_Mike
Senior Member
Jeep Grand Cherokee 3.0 V6 & 2.8 Sierra XR4i 4x4
Posts: 2354
|
|
Re: Hose needed
« Reply #8 on: Jan 27th, 2010, 10:35am » |
Quote Modify
|
I've seen silicone hose parts on ebay - bends of every angle and size and also reducer fittings and straight / flexible hose pipe - might be worth investigating and seeing if you can make something up.
At least silicone should last longer than rubber.
I'm going to have to do something similar on my Sierra XR4i as I know Ford don't have the hoses any longer.
Good luck !
|
|
IP Logged |
Star sign is Scorpio !
Sierra XR4i's are great...especially when fitted with 4WD
|
|
|
wolfblood
Junior Member
I'm a YaBB newbie!
Posts: 89
|
|
Re: Hose needed
« Reply #9 on: Jan 27th, 2010, 6:53pm » |
Quote Modify
|
Hi Scorpio Mike
I have seen the ones on ebay too but unfortunately I can't take the hose off to see what combinations would work until I am ready to put a new one in as can't leave the car at my mates garage. Am also unsure if there would be room to join different sized pipes and put on the clips as it goes through the engine.
Received a hose sent today but it was the wrong one  .
|
|
IP Logged |
|
|
|
gozz
Senior Member
Been around awhile
Posts: 3475
|
|
Re: Hose needed
« Reply #10 on: Jan 27th, 2010, 8:21pm » |
Quote Modify
|
Woolfblood.
I will send you a split hose that came off one of mine if you would like it to work with.PM your address.
GOZZ.
|
|
IP Logged |
|
|
|
wolfblood
Junior Member
I'm a YaBB newbie!
Posts: 89
|
|
Re: Hose needed
« Reply #11 on: Jan 27th, 2010, 10:56pm » |
Quote Modify
|
Cheers Gozz
Have emailed you the address. If I can find a combination of hoses that work I will send details and photos to the site.
Dean
|
|
IP Logged |
|
|
|
gozz
Senior Member
Been around awhile
Posts: 3475
|
|
Re: Hose needed
« Reply #12 on: Jan 28th, 2010, 12:13am » |
Quote Modify
|
Good man,will post 28th inst AM.
GOZZ.
|
|
IP Logged |
|
|
|
|
Home
Help
Search
Members
Login
Reply
Send Topic
Print