Author |
Topic: COSWORTH 1997. WIRING LOOM NEEDED (Read 1666 times) |
|
howke
Newbie
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/blank.gif)
![Email](https://www.fordscorpio.co.uk/YaBBImages/email.gif)
Posts: 40
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
COSWORTH 1997. WIRING LOOM NEEDED
« on: Jun 9th, 2010, 10:07am » |
Quote Modify
|
Hi all Scorpio lovers. http://www.fordscorpio.co.uk/eecvlooms.htm I need the loom from the lower right picture from the link ... it must be in good or even better in very good shape .... the one from the scorpio i bought half year ago is defective ... and the mechanic where the car is says its the best to not cut or replace the wires from the loom because they are sensor wires ... i know nothing about that so is that correct or !? I need it very urgently !!!!
|
|
IP Logged |
|
|
|
howke
Newbie
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/blank.gif)
![Email](https://www.fordscorpio.co.uk/YaBBImages/email.gif)
Posts: 40
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: COSWORTH 1997. WIRING LOOM NEEDED
« Reply #2 on: Jun 9th, 2010, 10:55am » |
Quote Modify
|
thanks for the ultra quick reply just called him and left a voice message
|
|
IP Logged |
|
|
|
Highlander
Moderator Expert
![*](https://www.fordscorpio.co.uk/YaBBImages/starmod.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/starmod.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/starmod.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/starmod.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/starmod.gif)
![](http://i1001.photobucket.com/albums/af132/CharlieSloan/Flags/Scotland.gif)
13 Scorpios, XR4x4, Suzuki SJ413 for off road :)
![Email](https://www.fordscorpio.co.uk/YaBBImages/email.gif)
Posts: 8244
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: COSWORTH 1997. WIRING LOOM NEEDED
« Reply #3 on: Jun 9th, 2010, 10:57am » |
Quote Modify
|
quite a few people have rewired looms successfully
|
|
IP Logged |
![](http://i8.tinypic.com/2qvxssl.gif)
on Oct 17th, 2011, 12:35pm, Simmo wrote:I give up ! Too much for an old boy! |
|
|
|
|
howke
Newbie
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/blank.gif)
![Email](https://www.fordscorpio.co.uk/YaBBImages/email.gif)
Posts: 40
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: COSWORTH 1997. WIRING LOOM NEEDED
« Reply #4 on: Jun 9th, 2010, 11:35am » |
Quote Modify
|
on Jun 9th, 2010, 10:57am, Highlander wrote:quite a few people have rewired looms successfully |
| yea mechanic sad it is possible but very very difficult ... so the used looms are best solution.
|
|
IP Logged |
|
|
|
Highlander
Moderator Expert
![*](https://www.fordscorpio.co.uk/YaBBImages/starmod.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/starmod.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/starmod.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/starmod.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/starmod.gif)
![](http://i1001.photobucket.com/albums/af132/CharlieSloan/Flags/Scotland.gif)
13 Scorpios, XR4x4, Suzuki SJ413 for off road :)
![Email](https://www.fordscorpio.co.uk/YaBBImages/email.gif)
Posts: 8244
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: COSWORTH 1997. WIRING LOOM NEEDED
« Reply #5 on: Jun 9th, 2010, 5:39pm » |
Quote Modify
|
Its definitely not difficult, it just takes time
|
|
IP Logged |
![](http://i8.tinypic.com/2qvxssl.gif)
on Oct 17th, 2011, 12:35pm, Simmo wrote:I give up ! Too much for an old boy! |
|
|
|
|
howke
Newbie
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/blank.gif)
![Email](https://www.fordscorpio.co.uk/YaBBImages/email.gif)
Posts: 40
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: COSWORTH 1997. WIRING LOOM NEEDED
« Reply #6 on: Jun 11th, 2010, 11:30am » |
Quote Modify
|
on Jun 9th, 2010, 5:39pm, Highlander wrote:Its definitely not difficult, it just takes time |
| so you say the loom is not some special signal wires like mine mechanic says , that they are hard to buy or too much expensive . i have time so i can rewire them if the wires i need can be bought at electronics store , if any got info about store please send it . I am from Europe , Croatia so have that in mind also
|
|
IP Logged |
|
|
|
Simmo
Administrator
![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/blank.gif) I'm an OAP !
Posts: 5508
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: COSWORTH 1997. WIRING LOOM NEEDED
« Reply #7 on: Jun 11th, 2010, 12:09pm » |
Quote Modify
|
Have a look at THIS site. Several members have used their products.
|
|
IP Logged |
Now I'm an OAP
|
|
|
gozz
Senior Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/blank.gif) Been around awhile
![Email](https://www.fordscorpio.co.uk/YaBBImages/email.gif)
Posts: 3475
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: COSWORTH 1997. WIRING LOOM NEEDED
« Reply #8 on: Jun 11th, 2010, 12:25pm » |
Quote Modify
|
howke. Seldom is there a problem with the wires unless they have been on fire,all you need to do is insulate them,which I have done several times without problems,as Highlander says it IS very time consuming but very satisfying when finished. GOZZ.
|
|
IP Logged |
|
|
|
Mike H
Senior Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](http://livinginthepast-audioweb.co.uk/imagex/misc/aurora-8-1-80x80.jpg)
Renault Clio
![Email](https://www.fordscorpio.co.uk/YaBBImages/email.gif)
Posts: 2594
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: COSWORTH 1997. WIRING LOOM NEEDED
« Reply #9 on: Jun 11th, 2010, 8:33pm » |
Quote Modify
|
on Jun 11th, 2010, 12:09pm, Simmo wrote:Have a look at THIS site. Several members have used their products. |
| Wow that's useful.
|
|
IP Logged |
Mike H
|
|
|
howke
Newbie
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/blank.gif)
![Email](https://www.fordscorpio.co.uk/YaBBImages/email.gif)
Posts: 40
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: COSWORTH 1997. WIRING LOOM NEEDED
« Reply #10 on: Jun 14th, 2010, 7:34am » |
Quote Modify
|
on Jun 11th, 2010, 12:25pm, gozz wrote:howke. Seldom is there a problem with the wires unless they have been on fire,all you need to do is insulate them,which I have done several times without problems,as Highlander says it IS very time consuming but very satisfying when finished. GOZZ. |
| Ok will try that , any special insulate tape should i use ? ... the transmission works normally for few minutes but when the car heatens up it transmission wont change gears . I hope its not worse then just insulation of the loom
|
|
IP Logged |
|
|
|
gozz
Senior Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/blank.gif) Been around awhile
![Email](https://www.fordscorpio.co.uk/YaBBImages/email.gif)
Posts: 3475
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: COSWORTH 1997. WIRING LOOM NEEDED
« Reply #11 on: Jun 14th, 2010, 8:35am » |
Quote Modify
|
Use proper electricians tape from an electrical factor,do not consider the sub standard 'motorists' stuff ,it's about 13mm wide and black.Whether or not the loom is causing your shift problem is debatable. GOZZ
|
|
IP Logged |
|
|
|
howke
Newbie
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/blank.gif)
![Email](https://www.fordscorpio.co.uk/YaBBImages/email.gif)
Posts: 40
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: COSWORTH 1997. WIRING LOOM NEEDED
« Reply #12 on: Jun 14th, 2010, 1:22pm » |
Quote Modify
|
on Jun 14th, 2010, 8:35am, gozz wrote:Use proper electricians tape from an electrical factor,do not consider the sub standard 'motorists' stuff ,it's about 13mm wide and black.Whether or not the loom is causing your shift problem is debatable. GOZZ |
| does the tape has to be resistant to high temperature can you give manufacture or where can i order one ... or the if its not a problem for u to buy it for me and i will pay you off course ... I am from Croatia and i think there is no proper electrical shop sorry for all those questions , and thanks for the quick replys
|
|
IP Logged |
|
|
|
gozz
Senior Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/blank.gif) Been around awhile
![Email](https://www.fordscorpio.co.uk/YaBBImages/email.gif)
Posts: 3475
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: COSWORTH 1997. WIRING LOOM NEEDED
« Reply #13 on: Jun 14th, 2010, 9:35pm » |
Quote Modify
|
The tape is plastic,PVC in fact,it may soften when hot but hardens when cool. I cannot believe that there is no insulating tape in Croatia !!! GOZZ.
|
|
IP Logged |
|
|
|
lesterlad aka Rodders
Full Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](http://i4.photobucket.com/albums/y108/rodders321/Guitarcat.gif)
2.3 Ghia x Estate (Manual)
![Email](https://www.fordscorpio.co.uk/YaBBImages/email.gif)
Posts: 877
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: COSWORTH 1997. WIRING LOOM NEEDED
« Reply #14 on: Jun 14th, 2010, 10:13pm » |
Quote Modify
|
howke; This is the sort of thing you need, comes in many different colours > > > Insulating Tape.
|
|
IP Logged |
There's are methods to my madness!!! I'm not sure what the methods are but there's definitely madness in them
|
|
|
howke
Newbie
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/blank.gif)
![Email](https://www.fordscorpio.co.uk/YaBBImages/email.gif)
Posts: 40
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: COSWORTH 1997. WIRING LOOM NEEDED
« Reply #15 on: Jun 15th, 2010, 10:17am » |
Quote Modify
|
on Jun 14th, 2010, 9:35pm, gozz wrote:The tape is plastic,PVC in fact,it may soften when hot but hardens when cool. I cannot believe that there is no insulating tape in Croatia !!! GOZZ. |
| off course there is ... but you mentioned that i must use proper insulating tape
|
|
IP Logged |
|
|
|
howke
Newbie
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/blank.gif)
![Email](https://www.fordscorpio.co.uk/YaBBImages/email.gif)
Posts: 40
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: COSWORTH 1997. WIRING LOOM NEEDED
« Reply #16 on: Jun 15th, 2010, 10:25am » |
Quote Modify
|
on Jun 14th, 2010, 10:13pm, lesterlad aka Rodders wrote:howke; This is the sort of thing you need, comes in many different colours > > > Insulating Tape. |
| hehehehe ok guys i know how it looks ... i can buy those tape on almost every gas station , electric store etc ... but the question is if it is not good quality and tape melts especially on summer ... temps here can reach 35°c in shade and engine heat hmmm that what worrys me , and to get down the gearbox its not a cheap work . OK i will go to the best electric store and buy the best tape . Progress will be on this topic . Thanks for all your help so far
|
|
IP Logged |
|
|
|
Simmo
Administrator
![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/blank.gif) I'm an OAP !
Posts: 5508
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: COSWORTH 1997. WIRING LOOM NEEDED
« Reply #17 on: Jun 15th, 2010, 1:26pm » |
Quote Modify
|
Have you checked out the site I put up in reply 7 ?. They have everything you could ever need.
|
|
IP Logged |
Now I'm an OAP
|
|
|
howke
Newbie
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/blank.gif)
![Email](https://www.fordscorpio.co.uk/YaBBImages/email.gif)
Posts: 40
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: COSWORTH 1997. WIRING LOOM NEEDED
« Reply #18 on: Jun 16th, 2010, 7:14am » |
Quote Modify
|
on Jun 15th, 2010, 1:26pm, Simmo wrote:Have you checked out the site I put up in reply 7 ?. They have everything you could ever need. |
| yes i did ... but until my mechanic send me wiring loom i really dont know what will i need ... i will do insulation with a help of mine father ( he is electrotechincal engineer , i think thats how its called in english) and will see if some connectors needs replacement .
|
|
IP Logged |
|
|
|
Simmo
Administrator
![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/blank.gif) I'm an OAP !
Posts: 5508
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: COSWORTH 1997. WIRING LOOM NEEDED
« Reply #19 on: Jun 16th, 2010, 8:14am » |
Quote Modify
|
You may have a problem with the connectors. They may LOOK the same but not be suitable. If you can retain the old connectors by joining the new wires cloe to the connectors that may be the answer.
|
|
IP Logged |
Now I'm an OAP
|
|
|
|