Author |
Topic: CV-joints, Cossie/ Diesel wanted (Read 1071 times) |
|
98Cossie_in_Norway
Newbie
New here
  
Posts: 7
|
 |
CV-joints, Cossie/ Diesel wanted
« on: May 11th, 2015, 9:49am » |
 Quote  Modify
|
Urgent with one 108mm CV-joint, but a couple is fine.
Shiment to Norway, I dont need the axle itself, just the joints.
SMS- +47 481 63 000.
Jørgen
|
|
 IP Logged |
'78 Granada Ghia 2,8i Eichberg turbo
'86 Sierra XR 4X4
'88 Scorpio GL 4X4
'98 Scorpio Ghia Cosworth
www.jorgen.tronderford.com
|
|
|
Scorpio_Mike
Senior Member
Jeep Grand Cherokee 3.0 V6 & 2.8 Sierra XR4i 4x4
Posts: 2354
|
|
Re: CV-joints, Cossie/ Diesel wanted
« Reply #1 on: May 11th, 2015, 1:16pm » |
Quote Modify
|
Take a look at eBay item number : 140757063919 - says they ship to Norway.
£40 each
|
|
IP Logged |
Star sign is Scorpio !
Sierra XR4i's are great...especially when fitted with 4WD 
|
|
|
98Cossie_in_Norway
Newbie
New here
Posts: 7
|
|
Re: CV-joints, Cossie/ Diesel wanted
« Reply #2 on: May 11th, 2015, 2:31pm » |
Quote Modify
|
Thank you so much for your help Mike.
I sent a request to the provider:
Regarding your Sierra Cosworth 2WD 108mm CV-joint.
I got a recommendation from http://www.fordscorpio.co.uk/, for this joint for use in my '98 Scorpio Cosworth. It's not the same finish number for the two cars, but they are both using 108mm cv-joints. The Scorp number is 6881729, while the Sierra is using 1493962. Do you have any idea if they mach?
Anyway, do you ship to Norway?
With regards!
Jørgen
|
|
IP Logged |
'78 Granada Ghia 2,8i Eichberg turbo
'86 Sierra XR 4X4
'88 Scorpio GL 4X4
'98 Scorpio Ghia Cosworth
www.jorgen.tronderford.com
|
|
|
Simmo
Administrator
I'm an OAP !
Posts: 5508
|
|
Re: CV-joints, Cossie/ Diesel wanted
« Reply #3 on: May 11th, 2015, 4:26pm » |
Quote Modify
|
Jorgen. I have spoken to Duncan and he has no record of your message. He and I suggest you contact him direct and his e-mail is:- duncan@automotiveunlimited.co.uk . He is more than ready to assist but may need a little more help from you in order to make sure the part is correct for you. He is used to shipping to Norway. Good luck and let us know how you get on.
|
|
IP Logged |
Now I'm an OAP
|
|
|
Simmo
Administrator
I'm an OAP !
Posts: 5508
|
|
Re: CV-joints, Cossie/ Diesel wanted
« Reply #5 on: May 11th, 2015, 4:30pm » |
Quote Modify
|
I have filed the details of this company for future reference. Duncan could not have been more helpful and may well be able to help any of us in the future.
|
|
IP Logged |
Now I'm an OAP
|
|
|
98Cossie_in_Norway
Newbie
New here
Posts: 7
|
|
Re: CV-joints, Cossie/ Diesel wanted
« Reply #6 on: May 11th, 2015, 6:08pm » |
Quote Modify
|
Thank you so much Simmo, for your engagement on my behalf.
I'll write Duncan by e-mail, and hope that I can be lucky enough to have a fitting joint here.
I'll give you feeback.
With regards!
Jørgen Løvseth
www.jorgen.tronderford.com
|
|
IP Logged |
'78 Granada Ghia 2,8i Eichberg turbo
'86 Sierra XR 4X4
'88 Scorpio GL 4X4
'98 Scorpio Ghia Cosworth
www.jorgen.tronderford.com
|
|
|
Simmo
Administrator
I'm an OAP !
Posts: 5508
|
|
Re: CV-joints, Cossie/ Diesel wanted
« Reply #7 on: May 11th, 2015, 7:21pm » |
Quote Modify
|
Jorgen. You are welcome. I just hope that he can help you. I'm sure he will if he can.  Good luck.
|
|
IP Logged |
Now I'm an OAP
|
|
|
98Cossie_in_Norway
Newbie
New here
Posts: 7
|
|
Re: CV-joints, Cossie/ Diesel wanted
« Reply #8 on: May 20th, 2015, 5:34pm » |
Quote Modify
|
It took only six days for my order from Duncan, at Automotive Unlimited, until the joints arrived my home in Norway. Not bad!
I was really excited to see if this was a match, if I could use the joints from Sierra RS Cosworth, 2WD in my Scorpio Cosworth.
Well, they are not the same joints, but the diameter, the splines and the bolt holes are the same. The difference is the thickness of the ball housing. The Sierra-joint is 8mm wider than the Scorpio-joint, but it fits and works well.
Here is the axle is mounted:
The original bolts are too short now, with a thicker ball housing. I was happy when I saw that Duncan provided new bolts in the package, but they were also at 50mm length, the same as the originals. Here I've mounted the joints without the original twin-washers, with the original bolts, but I'll go to town tomorrow to find new 60mm bolts.
Thank you so much for your support, and thanks to Duncan for being helpful.
Jørgen
|
|
IP Logged |
'78 Granada Ghia 2,8i Eichberg turbo
'86 Sierra XR 4X4
'88 Scorpio GL 4X4
'98 Scorpio Ghia Cosworth
www.jorgen.tronderford.com
|
|
|
Simmo
Administrator
I'm an OAP !
Posts: 5508
|
|
Re: CV-joints, Cossie/ Diesel wanted
« Reply #9 on: May 20th, 2015, 7:40pm » |
Quote Modify
|
Jorgen. Thank you such a comprehensive update and pictures. I will ensure that Duncan gets to see your write up. Great to know that you had such good service. 
|
|
IP Logged |
Now I'm an OAP
|
|
|
Tompion
Administrator
1997 2.3 Ultima estate.
Posts: 2918
|
|
Re: CV-joints, Cossie/ Diesel wanted
« Reply #10 on: Aug 17th, 2015, 1:11pm » |
Quote Modify
|
I chanced upon one whilst searching for something else so thought I'd add the details to this old post.
SHAFTEC PJ89N
Shows as fitting 24v on Ebay & Amazon.
I used the smaller Shaftec on my old 2.3 without problems ( that was PJ11N)
|
|
IP Logged |
ABS multiplug wheel sensor pins MK IV or MK 20
|
|
|
|
Home
Help
Search
Members
Login
Reply
Send Topic
Print