Author |
Topic: Inlet Plenum "0" rings (Read 550 times) |
|
Nunnspoet
Full Member
I love YaBB 1G - SP1!
Posts: 798
|
 |
Inlet Plenum "0" rings
« on: May 23rd, 2016, 6:50am » |
 Quote  Modify
|
Good morning folks, a bit of Sunshine at last.
To business: I am after some "0" rings for my 24 valve Cossies. They are the ones that seal the sleeve of the insert in the rear right of the Inlet Plenum as you look from the front of the car.
Ford don't supply them any-more and I have no idea as to where to source some from or what to order regarding size and thickness - or what heat resistance is required.
Ideally I would like to have 8 as there are 2 per sleeve and I have 2 Cossies and would have 4 to hold in reserve.
Am I in luck? Have you got just the job for me? If not any, advice as to where I can get some from would be great.
Best regards
Mik 
|
|
 IP Logged |
|
|
|
Scorpio_Mike
Senior Member
Jeep Grand Cherokee 3.0 V6 & 2.8 Sierra XR4i 4x4
Posts: 2354
|
|
Re: Inlet Plenum "0" rings
« Reply #1 on: May 23rd, 2016, 7:31am » |
Quote Modify
|
Try a local car spares shop - if you take one of the 'O' rings with you they might be able to match the size up for you, also check if there are any local businesses which make hydraulic hoses - they might have something.
Or, if you can measure it - outside diameter, inside diameter & thickness you might have some luck on ebay - not much you can't find there 
|
|
IP Logged |
Star sign is Scorpio !
Sierra XR4i's are great...especially when fitted with 4WD
|
|
|
Simmo
Administrator
I'm an OAP !
Posts: 5508
|
|
Re: Inlet Plenum "0" rings
« Reply #2 on: May 23rd, 2016, 9:08am » |
Quote Modify
|
A quick look on Google gave me This I have a set like the one in the red box but the link should get you what you want I guess.
|
|
IP Logged |
Now I'm an OAP
|
|
|
Nunnspoet
Full Member
I love YaBB 1G - SP1!
Posts: 798
|
|
Re: Inlet Plenum "0" rings
« Reply #3 on: May 24th, 2016, 6:39am » |
Quote Modify
|
Once again, thank you everyone  . I shall keep you updated.
Mike
|
|
IP Logged |
|
|
|
|
Home
Help
Search
Members
Login
Reply
Send Topic
Print