Author |
Topic: black adaptor plate from a facelift grill (Read 472 times) |
|
Torbayboy
Full Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/blank.gif)
Posts: 848
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
black adaptor plate from a facelift grill
« on: Oct 19th, 2019, 2:48pm » |
Quote Modify
|
On the facelift grill the middle 4 nuts are actually bolts, there is an adaptor bar some 60cm (24" for a leave voter) that has 4 sets of 2 holes in it, this adapts the bonnet fixings by bridging the gap between the new type grille and the bonnet. Anyone have one around also the 4 bolts that hold it in positon on the grille itself (not the small bolts that secure through the holes in the bonnet). Thanks Roy
|
|
IP Logged |
Cosworth Scorpio only 46 on the road now NOW down to 42.
|
|
|
Torbayboy
Full Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/blank.gif)
Posts: 848
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: black adaptor plate from a facelift grill
« Reply #2 on: Oct 20th, 2019, 11:26am » |
Quote Modify
|
Hi that looks about right it bridges the gap on the late grille to enable it to be attached to the bonnet by 4 bolts (the captive bolts from the original do not fit as they have changed the mounting format) also required are 4 oversize bolts to hold it all together which I do not have these are unusual as they have big threads to go into the plastic "bosses" in the grille itself. Ford Scorpio retaining rail Text reads:- "We sell here this new holding rail. It comes from a camp dissolution and was not yet installed. Part Number: Ford 98GG-8B013-AC, 1033564 Ford Scorpio 1994-1998 Due to storage and transport, slight signs of storage such as scratches and dirt have developed." Thanks Roy
|
|
IP Logged |
Cosworth Scorpio only 46 on the road now NOW down to 42.
|
|
|
Tompion
Administrator
![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif)
![](http://i.imgur.com/YwLOTZk.jpg)
1997 2.3 Ultima estate.
Posts: 2918
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: black adaptor plate from a facelift grill
« Reply #3 on: Oct 20th, 2019, 3:22pm » |
Quote Modify
|
I think the bosses are supposed to be moulded in but as they don't grease bolts they rust in so the insert comes out when you undo the bolt.
|
|
IP Logged |
ABS multiplug wheel sensor pins MK IV or MK 20
|
|
|
Torbayboy
Full Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/blank.gif)
Posts: 848
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: black adaptor plate from a facelift grill
« Reply #4 on: Oct 22nd, 2019, 1:52pm » |
Quote Modify
|
Sorted now found one thanks all for help Roy
|
|
IP Logged |
Cosworth Scorpio only 46 on the road now NOW down to 42.
|
|
|
|