Author |
Topic: Rear brake discs (Read 650 times) |
|
In2
Newbie
I'm a YaBB newbie!
Posts: 16
|
 |
Rear brake discs
« on: Jun 19th, 2021, 4:46pm » |
 Quote  Modify
|
I need new read brake discs.
tried and tried (with no luck).
the existing ones are stamped
"95GB
2A315DA
IF2? (the ? looks like a |-)
Min thickness 18mm"
I have a few pictures if it will help.
Does anyone have any ideas?...I think they are too grooved to be simply skimmed.
OR does anyone know of anyone in the uk that could, maybe, build them up and then turn/grind them up?
They are for my Ford Cardinal Hearse which is based on a 2.3 petrol Scorpio estate (1997)
Thanks in advance
John
( I managed to get frnt ones really easy.)
|
|
 IP Logged |
Old, Broke & tired (shouldn't be allowed out really)
|
|
|
brds
Full Member
Posts: 150
|
|
Re: Rear brake discs
« Reply #1 on: Jun 19th, 2021, 9:16pm » |
Quote Modify
|
Is this any good?
https://www.ebay.co.uk/itm/234000757026?fits=Car+Make%3AFord%7CModel%3AS corpio&epid=19015630012&hash=item367b883122:g:0ScAAOSwo2BglprT
At the bottom, there's a table of applicable vehicles and halfway down, there a line:
FORD SCORPIO Mk II Turnier (GNR, GGR) 2.3 i 16V Estate Petrol 06/1996 08/1998 RWD 16 147 108
|
|
IP Logged |
|
|
|
Torbayboy
Full Member
Posts: 848
|
|
Re: Rear brake discs
« Reply #2 on: Jun 19th, 2021, 9:44pm » |
Quote Modify
|
Had loads of problems rying to get a pair of rears for my 95 cos saloon.
Best advice measure the diameter and thickness of the fitted ones and go from there, lots of variants and the chart on here is not always correct, sounds pessimistic I know, but its just being honest there are crossovers with other Ford cars that will fit and do the job.
|
|
IP Logged |
Cosworth Scorpio only 46 on the road now NOW down to 42.
|
|
|
In2
Newbie
I'm a YaBB newbie!
Posts: 16
|
|
Re: Rear brake discs
« Reply #3 on: Jun 20th, 2021, 9:21am » |
Quote Modify
|
on Jun 19th, 2021, 9:16pm, brds wrote:
Annoyingly no ...sigh.... they are showing them to be Just 10mm thick & single.
I have even been to a few disc cmpanies and left the sizes but to no avail.......have had 3 or 4 sent to me but have had to return them.....
thank you for your time and effort much appreciated
|
|
IP Logged |
Old, Broke & tired (shouldn't be allowed out really)
|
|
|
In2
Newbie
I'm a YaBB newbie!
Posts: 16
|
|
Re: Rear brake discs
« Reply #4 on: Jun 20th, 2021, 9:29am » |
Quote Modify
|
on Jun 19th, 2021, 9:44pm, Torbayboy wrote:Had loads of problems rying to get a pair of rears for my 95 cos saloon.
Best advice measure the diameter and thickness of the fitted ones and go from there, lots of variants and the chart on here is not always correct, sounds pessimistic I know, but its just being honest there are crossovers with other Ford cars that will fit and do the job.
|
|
Good advice ! hasn't worked so far though
I have even tried some that were for other manufacturers....If I can get close-ish......I would settle for a slight larger diameter and turn them down....or a smaller/larger centre hub diameter...but the ones that are closest are single discs and only 10mm thick.
Thanks for the input....this has been driving me crazy for a few months....luckily the current ones are "just" badly scored not in a critical state.
|
|
IP Logged |
Old, Broke & tired (shouldn't be allowed out really)
|
|
|
a900one
Full Member
A scorpio is for life not just for christmas
Posts: 980
|
|
Re: Rear brake discs
« Reply #5 on: Jun 20th, 2021, 12:38pm » |
Quote Modify
|
i put my number in europarts and I am sure they are the right discs for my cosworth.
Gerald
|
|
IP Logged |
|
|
|
Torbayboy
Full Member
Posts: 848
|
|
Re: Rear brake discs
« Reply #6 on: Jun 20th, 2021, 4:45pm » |
Quote Modify
|
Hi the ones on my facelift 2.3 estate appear to be 260 dia and 18 thick vented, if this is similar to yours (you say its based on a 2.3 estate) try my reg No R602PJM and see if that comes up with it. The cosworth ones are different and some of the sierra ones will (I thinK) fit and do the job.
Sooooo many variants drives you round the bend bought a set off fleabay and they fitted Xanders 12v estate not my cos estate, stay with it - it'll be alright in the end IF it's not alright it's not the end
www.ebay.co.uk/itm/334010832376?hash=item4dc498d5f8:g:9I4AAOSwlchgqflN
THESE are 18mm thick and vented, locally to me I have had items from this seller & from Exeter not leeds as listed. They seem to have a lot of ford "stuff" (Jeff Bezos word as he can't manage more than 1 syllable due to weight of his wallet)
|
|
IP Logged |
Cosworth Scorpio only 46 on the road now NOW down to 42.
|
|
|
In2
Newbie
I'm a YaBB newbie!
Posts: 16
|
|
Re: Rear brake discs
« Reply #7 on: Jun 21st, 2021, 10:18am » |
Quote Modify
|
on Jun 20th, 2021, 12:38pm, a900one wrote:i put my number in europarts and I am sure they are the right discs for my cosworth.
Gerald |
|
Have had 3 lots from europart so far ....even sending them the dimensions they still just sent wrong ones....
But Ta !
|
|
IP Logged |
Old, Broke & tired (shouldn't be allowed out really)
|
|
|
In2
Newbie
I'm a YaBB newbie!
Posts: 16
|
|
Re: Rear brake discs
« Reply #8 on: Jun 21st, 2021, 10:25am » |
Quote Modify
|
on Jun 20th, 2021, 4:45pm, Torbayboy wrote:Hi the ones on my facelift 2.3 estate appear to be 260 dia and 18 thick vented, if this is similar to yours (you say its based on a 2.3 estate) try my reg No R602PJM and see if that comes up with it. The cosworth ones are different and some of the sierra ones will (I thinK) fit and do the job.
Sooooo many variants drives you round the bend bought a set off fleabay and they fitted Xanders 12v estate not my cos estate, stay with it - it'll be alright in the end IF it's not alright it's not the end
www.ebay.co.uk/itm/334010832376?hash=item4dc498d5f8:g:9I4AAOSwlchgqflN
THESE are 18mm thick and vented, locally to me I have had items from this seller & from Exeter not leeds as listed. They seem to have a lot of ford "stuff" (Jeff Bezos word as he can't manage more than 1 syllable due to weight of his wallet) |
|
I got alll excited by this approach.... dammit they are 253 dia and mine are 263........
Thanks again Torbayboy...(nice part of Blighty I might add!)
|
|
IP Logged |
Old, Broke & tired (shouldn't be allowed out really)
|
|
|
a900one
Full Member
A scorpio is for life not just for christmas
Posts: 980
|
|
Re: Rear brake discs
« Reply #9 on: Jun 21st, 2021, 11:07am » |
Quote Modify
|
Could you get bigger ones and skim them down to the size, simple job for someone with a lathe. I think the cosworth ones are 278 o/d.
|
|
IP Logged |
|
|
|
gemeg22171
Full Member
Posts: 156
|
|
Re: Rear brake discs
« Reply #10 on: Jun 21st, 2021, 3:00pm » |
Quote Modify
|
Have you tried Larkspeed Performance Centre
0113 2643231
|
|
IP Logged |
|
|
|
In2
Newbie
I'm a YaBB newbie!
Posts: 16
|
|
Re: Rear brake discs
« Reply #11 on: Jun 21st, 2021, 3:14pm » |
Quote Modify
|
Will give em a go thanks
|
|
IP Logged |
Old, Broke & tired (shouldn't be allowed out really)
|
|
|
|
Home
Help
Search
Members
Login
Reply
Send Topic
Print