Author |
Topic: Steptoe (Read 956 times) |
|
KEEF
Full Member
1997 2.3 Ultima Dark Green
  
Posts: 205
|
Hi Jerry
Did you get you H.B.C sorted out M8
[i] Keith[/i]
|
|
 IP Logged |
YOU CAN TELL A GOOD WAX BY THE BEADS OF WATER LEFT ON THE CAR. MUST BE HAIL STONES ON MINE !!
|
|
|
steptoe
Newbie
2.0l exec in blue
Posts: 25
|
 |
Re: Steptoe
« Reply #1 on: May 7th, 2004, 10:46pm » |
 Quote  Modify
|
Hi KEF
Not yet still waiting for a donor car.
Sorry for the delay in replying but i have been working my backside off this week to catch up from the bank holiday
Jerry
|
|
IP Logged |
|
|
|
KEEF
Full Member
1997 2.3 Ultima Dark Green
Posts: 205
|
|
Re: Steptoe
« Reply #2 on: May 7th, 2004, 10:50pm » |
Quote Modify
|
Hi Jerry
I hate to think what you must do for a living M8 ? 
Keith
|
|
IP Logged |
YOU CAN TELL A GOOD WAX BY THE BEADS OF WATER LEFT ON THE CAR. MUST BE HAIL STONES ON MINE !!
|
|
|
steptoe
Newbie
2.0l exec in blue
Posts: 25
|
|
Re: Steptoe
« Reply #3 on: May 7th, 2004, 10:51pm » |
Quote Modify
|
I'm a heating engineer
and there aren't enough of me to go round 
|
|
IP Logged |
|
|
|
KEEF
Full Member
1997 2.3 Ultima Dark Green
Posts: 205
|
|
Re: Steptoe
« Reply #4 on: May 7th, 2004, 11:00pm » |
Quote Modify
|
Hi Jerry
I just wanted to know because you know I was getting
57 come up on the C.C reset, so I got another HBC for a breakers and tried that, but still getting 57 come up on the reset !! Both are the new modified unit's. so still not sure what's wrong.
Keith
|
|
IP Logged |
YOU CAN TELL A GOOD WAX BY THE BEADS OF WATER LEFT ON THE CAR. MUST BE HAIL STONES ON MINE !!
|
|
|
steptoe
Newbie
2.0l exec in blue
Posts: 25
|
|
Re: Steptoe
« Reply #5 on: May 7th, 2004, 11:53pm » |
Quote Modify
|
Keith
Have you tried the hbc fault finding. This should tell you if your hbc is working, if it is then it's likely that the satc is faulty or from what some others told me at derby it may take several resets till it really resets ? go figure
jerrt
|
|
IP Logged |
|
|
|
admin
Administrator
The Big Boss
Posts: 1410
|
|
Re: Steptoe
« Reply #6 on: May 7th, 2004, 11:59pm » |
Quote Modify
|
Keith,
code 57 is a tricky one, it doesnt always refer to a faulty HBC and often a rest will surfice. If you have CC faulty operation then take action but if its simply the 57 or 07 fault that comes up with no bad symptoms then just ignore it. If you have a true fault then investigate the tests on my ac index pages at http://www.fordscorpio.co.uk/acindex.htm
Pete
CC/AC Author
List Founder
Site Co-Founder
|
|
IP Logged |
|
|
|
KEEF
Full Member
1997 2.3 Ultima Dark Green
Posts: 205
|
|
Re: Steptoe
« Reply #7 on: May 8th, 2004, 6:51am » |
Quote Modify
|
Hi B.B
Yes your right B.B, the blower seem's to work fine, what ever I set it at, it correspond's and doesn't seem to stop and start, It's just when I try to reset the C.C unit I get the 00 Display up and then click down to 50 on the display and has soon as I take my finger off the button it jump's to 57 before I can press and hold the recycle button in to obtain the 00 display again to tell me it's reset.
Keith 
|
|
IP Logged |
YOU CAN TELL A GOOD WAX BY THE BEADS OF WATER LEFT ON THE CAR. MUST BE HAIL STONES ON MINE !!
|
|
|
Kevin_Tulloch
Full Member
What flashing lights officer!!!!
Posts: 475
|
|
Re: Steptoe
« Reply #8 on: May 8th, 2004, 9:28am » |
Quote Modify
|
Hi Keith
I think it'd be easier to find someone who hasn't had that code come up when resetting!!!All i can suggest is to keep trying to reset the C/C.I've had the same problems with getting the fault code AND with it jumping back to 57,before i can do the final reset.Just keep trying and it should work (eventually!).
Regards
Kev
|
|
IP Logged |
Cossie Ultima with a few surprising mods,but it's
|
|
|
KEEF
Full Member
1997 2.3 Ultima Dark Green
Posts: 205
|
|
Re: Steptoe
« Reply #9 on: May 8th, 2004, 7:16pm » |
Quote Modify
|
Cheer's Kev
I will persevere with the reset.
Thank's for your help Kev. M8
Keith
|
|
IP Logged |
YOU CAN TELL A GOOD WAX BY THE BEADS OF WATER LEFT ON THE CAR. MUST BE HAIL STONES ON MINE !!
|
|
|
scorpio_man
Administrator
Ford Kuga awd
Posts: 5654
|
|
Re: Steptoe
« Reply #10 on: May 8th, 2004, 10:03pm » |
Quote Modify
|
hi there
when doing the re-set, press down to get the code 50. then start the reset (1 or 2 buttons), the error code will come back up, but just carry on pressing the button(s) until the flashing 00 appears. let the button(s) go and wait untill -- appear. job done.
hth
|
|
IP Logged |
|
|
|
|
Home
Help
Search
Members
Login
Reply
Send Topic
Print