Ford Scorpio Forum - Print Page


    
      
        Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> Give/Need advice to/from others >> 2,9 rocker
        
(Message started by: V6 on Sep 19^th, 2004, 2:56pm)

Title: 2,9 rocker
Post by V6 on Sep 19^th, 2004, 2:56pm

Is the 2,9 V6 engine( 12 valve ) rocker same as 2,8 rocker?
I think the follover is the same in both engines.
How about the rocker arm?

Title: Re: 2,9 rocker
Post by october on Sep 20^th, 2004, 11:43am

hi--part no for rockers are different.but you can decide for your self with this info..rocker for 2.8 finis no 6016242 (GB) finis no 6133949 (D)..rocker shaft finis no 6197449.the german rocker for the 2.8 is the same finis no that is fitted to the 2.9 engines.the rocker shafts have the same finis no 6197449,be it 2.8 or 2.9.12v. .PS finis no 6016242 could have been supperseded but i have no way of checking this.HTH :-/

Title: Re: 2,9 rocker
Post by V6 on Sep 20^th, 2004, 4:51pm

http://www.camcraftcams.com is selling roller rockers for 2,9 engine.
I am just wondering if it fits 2,3 engine.
I have a historic race car with that engine.

Title: Re: 2,9 rocker
Post by october on Sep 20^th, 2004, 6:12pm

hi-just checked 2.3 6cyl.rockers are the same finis no 6016242 as 1st reply .you could contact your nearest ford parts dept and see if finis no 6016242 was supperseded by the german no 6133949..rocker shafts and push rods and cam followers are the same for the v6s,that i can make out if that helps.