Ford Scorpio Forum (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
General >> Give/Need advice to/from others >> Programing the remote(s)
(Message started by: Snoopy on Jan 8th, 2005, 11:57am)

Title: Programing the remote(s)
Post by Snoopy on Jan 8th, 2005, 11:57am
I have after many unsucessful attempts I have manage to obtain another remote for my car, as the one I have is getting old like me and slightly worn...... I have always programmed my remote as per the instructions in the handbook. ( switch on to postition 1 and then press the unlock button... ding .... all done)
When I came to programme the (new) remote I found that I was not able to do it.....(as per the instructions in the handbook) even if only doing the one..... . so to plan 'B'  try ther other method and this time it worked.....

So another lesson learned... The remotes have different identies and therfore I suspect that the newer one is primarily intended for the later models which are programmed as per the site instructions..... But this is something else learnt .

Maybe my experience may help someone else who has a similar problem. But I now have 2 remotes and both working.....

Ta very muchly to you all who founded all this.... yet again....



Ford Scorpio Forum » Powered by YaBB 1 Gold - SP 1.3.1!
YaBB © 2000-2003. All Rights Reserved.