Ford Scorpio Forum - Print Page


    
      
        Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> Give/Need advice to/from others >> FINIS no. check
        
(Message started by: Paul_Boulden on Feb 4^th, 2005, 5:24pm)

Title: FINIS no. check
Post by Paul_Boulden on Feb 4^th, 2005, 5:24pm

Can anyone please confirm the following FINIS no.s ?
4000411
6941997
They are an automatic gear box gasket & screen supposedly for a 1996 2.9 12v.
I wish to check as they were supplied by a FMD who lost the initial order and then tried to tell me my car is a Granada.

Many thanks,

Paul Boulden

Title: Re: FINIS no. check
Post by daven on Feb 4^th, 2005, 7:33pm

Hi Paul,

they are listed for the Scorpio

Gasket - from 01/1993 to 07/2000

Screen - from 10/1997 to 08/1998 but also shows for Sierra/Granada/Scorpio 09/1988 to 10/1994

Daven

Title: Re: FINIS no. check
Post by Paul_Boulden on Feb 5^th, 2005, 1:25pm

Hi Daven,

Thanks for the input. So gasket is OK but what about the screen ? The dates have a gap which is where my car fits.

Confused.

Paul

Title: Re: FINIS no. check
Post by daven on Feb 5^th, 2005, 8:14pm

Hi Paul
IM me your VRN an I will look it up for sure!

Daven

Title: Re: FINIS no. check
Post by daven on Feb 6^th, 2005, 9:02am

Hi Paul

The screen finis should be 7284671 10/94 to 10/97

HTH

Daven

Title: Re: FINIS no. check
Post by SaveTheNight on Feb 6^th, 2005, 10:16am

slight care needed I think with the screen if you needed the finis for an actual purchase ... Snoopy will confirm .. but I think you have to also state the mirror fixing as there are three or four different ones ... I may be wrong though ... regards .....STN

Title: Re: FINIS no. check
Post by daven on Feb 6^th, 2005, 3:20pm

Well I checked it against Pauls VIN Number and it was the only one listed - ;) but as STN says care is required but I guess as you only wanted to confirm your suspicions and make sure FMD get the right ones in stock!

Its the screen in the autobox not the windscreen ;)

Cheers

Daven

Title: Re: FINIS no. check
Post by Paul_Boulden on Feb 8^th, 2005, 8:36pm

My confusion is now sorted.

I spoke to the supplying FMD who said they were right & the other FINIS code doesn`t exist - not at all helpful. I then visited another small FMD to buy a sump plug washer ( 20p ! ) and was able to check both numbers - they are both correct but the 7284671 no. has recently been discontinued so the 4000411 no. now applies 1988-98

Thanks to Daven for his help.

Paul Boulden