|
||
Title: Spark plugs Post by derekne on Mar 24th, 2005, 10:57am Hello, Can anyone tell me what the spark plug gap is for my LPG ford scorp 2.3. I know it has to be a shorter gap but not sure how big. Thanks ... Derek |
||
Title: Re: Spark plugs Post by scorpio_man on Mar 24th, 2005, 11:00am hi there 0.8mm to 0.9mm will be fine. what make/type of plug did you go for? i'm due a change soon (been saying that for ages now ;D) |
||
Title: Re: Spark plugs Post by derekne on Mar 24th, 2005, 11:39am The plugs are called "Laser platinum" premium. They are made from NGK spark plug co.LTD. They are double platinum. I believe they are made in Japan. Thank you very much. Ps Dont do what I did and fit them in. Then think o shoot I havent changed the gap. :-[ What a load of extra hassel. :( |
||
Title: Re: Spark plugs Post by Richard on Mar 24th, 2005, 1:07pm Modern plugs if bought for the car are normally set to the correct gap, but still worth a check before you put them in i suppose. |
||
Title: Re: Spark plugs for 2.3 16 valve Post by scorpio_man on Apr 8th, 2005, 11:16am hi there well, i've bought the ngk plugs as well. just about to fit them. one thing you need to check is the gap size! you could drive a bus through it! i think they're a bit special, so i'll only close it a bit, maybe 0.9mm to 1.0mm. on petrol you might get away with leaving it alone. derek, if you see this, how is your car running with them? cost £27 inc VAT for the 4 (local parts shop). listed for the 2.9 24 valve as well. http://img.photobucket.com/albums/v521/scorpio_man/DSCN0605.jpg http://img.photobucket.com/albums/v521/scorpio_man/DSCN0604.jpg |
||
Title: Re: Spark plugs Post by wudz on Apr 11th, 2005, 12:00am Hi, Anybody after PFR6B plugs look on Ebay, I have just purchased a set for £22.00 with free postage. Seems like a bargain to me...His feedback seems OK.. Cheers John |
||
Title: Re: Spark plugs Post by bigmaltwo on Apr 12th, 2005, 2:50am pretty sure it's 1.0 mm |
||
Title: Re: Spark plugs Post by scorpio_man on Apr 12th, 2005, 6:06am hi there 1.0mm is for the standard platinum plugs. these new double platinum ones are 1.1mm and when using LPG you need to close it a bit to around 0.9 to 1.0mm. regards |
||
Title: Re: Spark plugs for 2.3 16 valve Post by derekne on Apr 12th, 2005, 8:32pm on 04/08/05 at 11:16:30, scorpio_man wrote:
oops!!! I havnt been on in a couple of days sorry for the delay. My 2.3 DOHC is running nice with those spark plugs in. Nice and sweet. Now the gap has been reduced. Regards... Derek. |
||
Title: Re: Spark plugs Post by scorpio_man on Apr 12th, 2005, 10:08pm hi derek yes, mine seem fine with them as well. regards |
||
Title: Re: Spark plugs Post by EinA on Apr 15th, 2005, 6:51pm Hi Scorpio_man, I seem to remember you were going to try Iridum? I've been running my scorpio(lpg) since 6/12/04 on NGK Iridum plugs. Every thing seems to be running fine. Maybe the cost of 53 pounds put you off? David |
||
Title: Re: Spark plugs Post by derekne on Apr 15th, 2005, 11:59pm If you could get a product for 50 pounds. Then have a simular product that does exactilly the same job for allot less money which would you go for? ::) |
||
Title: Re: Spark plugs Post by EinA on Apr 16th, 2005, 3:30pm do tell me about this product ??? The reason I went for Iridum is because LPG burns hotter and produces more wear and tear on the spark plugs. So accordingly Iridum being harder material then they last better. David |
||
Title: Re: Spark plugs Post by scorpio_man on Apr 16th, 2005, 4:37pm hi there i went for the double platimum because that's what my local shop had and i'd remembered derek had fitted them. btw i only needed 4! 2 cheaper than you!!! ;D |
||
Title: Re: Spark plugs Post by Steve_S on Apr 28th, 2005, 3:03am I Use NGK triple electrode plugs for LPG running, 20 k and not as much as a hic-up. Platinum plugs may not run well in hi performance engines using LPG, certainly I would not recommend them in the 24v. |
||
Ford Scorpio Forum » Powered by YaBB 1 Gold - SP 1.3.1! YaBB © 2000-2003. All Rights Reserved. |