Ford Scorpio Forum - Print Page


    
      
        Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> Give/Need advice to/from others >> Lambda Sensor Connections
        
(Message started by: jackthom on Apr 12^th, 2005, 12:05pm)

Title: Lambda Sensor Connections
Post by jackthom on Apr 12^th, 2005, 12:05pm

I just received a universal 4-wire HO2 Sensor and amazingly the wire colours are identical to the existing sensor.
However to play safe I wonder if anyone can confirm whether the Scorpio connectiona are as follows..

White (x2) = Heater

Black = Signal

Grey = Sensor Earth

Title: Re: Lambda Sensor Connections
Post by martin_rowe on Apr 12^th, 2005, 12:59pm

just wire in like for like, all sensors of the same type have the same wire colours. solder all joints & use heat shrink over them if poss, should come with sensor.
Martin

Title: Re: Lambda Sensor Connections
Post by jackthom on Apr 12^th, 2005, 6:43pm

I don't trust the obvious any more. Thanks for the reassurance Martin. :)