Ford Scorpio Forum - Print Page


    
      
        Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> Give/Need advice to/from others >> engine under tray
        
(Message started by: webbo67 on Apr 20^th, 2005, 1:44pm)

Title: engine under tray
Post by webbo67 on Apr 20^th, 2005, 1:44pm

Hi all
Just purchased an engine under tray and noticed that there are 16 fixing holes. 12 one size and 4 larger ones.
I purchased the fixing kit from ford parts uk and it contains only 10 fixing screws(all the same size). Just wondering if anyone knows if all 16 holes are used and if they aren't then which 10 are.

Thanks
Andy

Title: Re: engine under tray
Post by Kenboy on Apr 20^th, 2005, 2:58pm

Hi Andy It is just the four large holes that are used I have no idea were the other ones come from but there are only four on mine?.

Regards Kenboy

Title: Re: engine under tray
Post by martin_rowe on Apr 20^th, 2005, 4:07pm

the tray mounts with just the 4 outer (large) holes, the others are there for the rivets that hold in the foam padding, you get 10 screws becaust that is the pack quantity.
Martin

Title: Re: engine under tray
Post by Simmo on Apr 20^th, 2005, 8:08pm

On my 2ltr the tray fixes with only four screws as allready stated. If you look under the car there should be four red(in my case) nylon inserts in the chassis corresponding with the four holes in the tray. Push the tray at an angle up and over the mounting at the rear of the engine then slide forward to sit behind the bumper and locate the four torx screws as indicated,two each side.HTH.Simmo

Title: Re: engine under tray
Post by webbo67 on Apr 21^st, 2005, 1:48am

Thanks Guys

Andy