|
||
Title: 24V wiring loom replacement Post by david_molloy on Jan 26th, 2006, 12:33am Hello All Without repeating the numerous post on rotting looms in V etc. Has anyone replaced, rather than repair, the complete loom that runs from auto box through V to engine bay connectors. How much did it cost? and were parts readily available ? Looks like loom could give an old car a new lease of life. Thanks david. |
||
Title: Re: 24V wiring loom replacement Post by - Mike - on Jan 26th, 2006, 12:44am on 01/26/06 at 00:33:46, david_molloy wrote:
Sorry David can't help I haven't need to touch the loom yet (touch wood) :-X but what do you mean by through the V are you refering to the injector harness between the plenium chamber ? Is there something going on there that we should be wary about ??? |
||
Title: Re: 24V wiring loom replacement Post by Ford-Son-Major on Jan 26th, 2006, 1:15am Hi David. I replaced my loom with a new one bought from Fordpartsuk in May last year. Cost mega bucks. About £300.. Talk with Roger. I think they souced it from Holland. Dont forget to get the special ford grease for the connection plugs. (stops corrosion of the pin/connectors) Regards Mike in Luton.. 8) 8) |
||
Title: Re: 24V wiring loom replacement Post by barrie on Jan 30th, 2006, 11:45am Hi David, I was luck and when i bought my car it had a replacement 98 fuel loom fitted The best thing to is look at the cars that are breaking on Ebay as you can pick them up for about £40. But if you want a new one I would try Ford parts uk as they had some a few months ago Cheers Barrie |
||
Ford Scorpio Forum » Powered by YaBB 1 Gold - SP 1.3.1! YaBB © 2000-2003. All Rights Reserved. |