|
||
Title: Front lower suspension arm Post by Allen on May 30th, 2006, 11:05pm Can anybody give me any advice on changing my nearside front lower sus arm. My car failed on the ball joint in a recent mot and sods law as you all know, i.ve had to buy the whole lower arm to rectify the problem. I'm no stranger to jobs like this i've just never done one on an Ultima before and i would like to simplify things for myself by hopefully learning from other peoples past experience prior to starting the job. Many thanks to anybody in a position to help. Steve |
||
Title: Re: Front lower suspension arm Post by Simmo on May 31st, 2006, 5:53am Is this what you aree after?.http://www.fordscorpio.co.uk/wishbone.htm. |
||
Title: Re: Front lower suspension arm Post by mr._floppy on May 31st, 2006, 12:48pm I suggest a decent socket set, a torx socket for the pinch bolt and a ball joint splitter ( I prefer the one shaped like a tuning fork as you can give it a good whack with a hammer :P ). If poss best to get a new pinch bolt in case of trouble with the old one. It's plain sailing as long as all the old bolts come off easily, some posters have had trouble with a rusted up front wishbone securing bolt. Remember always tighten up the bolts ( except the pinch bolt ) when the car is back on the ground. Good Luck. |
||
Title: Re: Front lower suspension arm Post by Allen on May 31st, 2006, 9:44pm Thanks for that advice people. Shouldnt be a problem............(famous last words) I'm tackling it this coming weekend so fingers crossed i wont be requiring any further assistance. Thanks again. |
||
Ford Scorpio Forum » Powered by YaBB 1 Gold - SP 1.3.1! YaBB © 2000-2003. All Rights Reserved. |