|
||
Title: ABS Sensor & Hub diagrams? Post by ml on Aug 17th, 2006, 4:17pm Hi Dont suppose anyone has a diagram of the front abs sensor/hub assembly on 1995 2.0i estate. ??? Been trying to remove faulty abs sensor but only managed to get half of it out. remainder still in hub. need to know how far down i can safely drill out before doing any damage to sensor ring etc. :P any help would be appreciated. ml 8) |
||
Title: Re: ABS Sensor & Hub diagrams? Post by Snoopy on Aug 17th, 2006, 4:55pm isTHIS (http://www.fordscorpio.co.uk/images/frontsuspension.gif)what you need |
||
Title: Re: ABS Sensor & Hub diagrams? Post by ml on Aug 17th, 2006, 5:50pm Thanx snoopy, I guess what i really need to know is how for into the hub assembly the sensor sits. Thaught about taking O/S sensor out to check, but i'm asuming its gonna be just as difficult to remove as the N/S one is. If the rear sensors are similar in dimensions I'll use those as a guide. (I've managed to remove & clean those ok) Thanks again ml |
||
Title: Re: ABS Sensor & Hub diagrams? Post by hellblue on Aug 17th, 2006, 9:35pm If you have got part of the sensor left in the hole try a centre punch & or small chisel to pry & pick it out of the hole, they can be a bit of a pain |
||
Title: Re: ABS Sensor & Hub diagrams? Post by ml on Aug 19th, 2006, 3:04pm right then......... dug outb rest of sensor (i think). can anyone tell me if the metal cup left in hub is part of sensor or not. here's a pic http://uk.pg.photos.yahoo.com/ph/jess_leader/detail?.dir=/38a4re2&.dnm=9459re2.jpg&.src=ph thanks again ml |
||
Ford Scorpio Forum » Powered by YaBB 1 Gold - SP 1.3.1! YaBB © 2000-2003. All Rights Reserved. |