Ford Scorpio Forum - Print Page


    
      
        Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> Give/Need advice to/from others >> Exhaust chrome/stainless tail
        
(Message started by: cossieguy on Sep 1^st, 2006, 7:01pm)

Title: Exhaust chrome/stainless tail
Post by cossieguy on Sep 1^st, 2006, 7:01pm

Is it still possible to get a new end piece for a 24v exhaust? Mine looks a bit tatty and the chrome is wearing away.

Title: Re: Exhaust chrome/stainless tail
Post by DJWerkz on Sep 1^st, 2006, 7:18pm

I would speak to Bill at Powercraft Engineering.

Title: Re: Exhaust chrome/stainless tail
Post by cossieguy on Sep 1^st, 2006, 7:48pm

Thanks have emailed Topgear in kings lynn (Part of Powercraft). :)

Title: Re: Exhaust chrome/stainless tail
Post by DJWerkz on Sep 2^nd, 2006, 5:20pm

I didn't know Powercraft had a subsidiary? You got a web link?

Title: Re: Exhaust chrome/stainless tail
Post by cossieguy on Sep 3^rd, 2006, 1:59pm

Try this address,

http://www.topgear.co.uk/contact/complete.html

It looks like this is a franchise that is part of Powercraft group, could be wrong but they seem confident of being able to replace the tailpipe. If you look under exhausts then their own tailpipes there's a couple that look identical just need to check dimensions.

Title: Re: Exhaust chrome/stainless tail
Post by DJWerkz on Sep 3^rd, 2006, 2:27pm

Are you sure you are not getting confused with 'Powerflow'?