Ford Scorpio Forum - Print Page


    
      
        Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> Give/Need advice to/from others >> Removing 2.3 inlet manifold
        
(Message started by: jonnycab on Sep 5^th, 2006, 6:01pm)

Title: Removing 2.3 inlet manifold
Post by jonnycab on Sep 5^th, 2006, 6:01pm

I can't seem to find the procedure for removing the 2.3 inlet manifold (maybe I'm just not looking hard enough).

Can anyone point me in the right direction?
If not then any advice would be greatly appreciated...i.e....time taken, how many bolts & where they all are etc, anything really. :)

Title: Re: Removing 2.3 inlet manifold
Post by Tompion on Sep 5^th, 2006, 6:23pm

Hi
You could try here
http://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl?board=Problems;action=display;num=1151594566;start=0#0

or here ;)
http://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl?board=Advice;action=display;num=1157233997

Dave

Title: Re: Removing 2.3 inlet manifold
Post by jonnycab on Sep 5^th, 2006, 7:03pm

Oops....sorry I forgot, I already posted the same question a few days ago. ::)
Must go & see a quack about my memory probs :P

Title: Re: Removing 2.3 inlet manifold
Post by cossie_al on Sep 5^th, 2006, 9:22pm

on 09/05/06 at 19:03:35, jonnycab wrote:

Must go & see a quack about my memory probs :P

Jonny,
Remind me never to get an airport run from you mate ;) ;D ;D

Title: Re: Removing 2.3 inlet manifold
Post by jonnycab on Sep 5^th, 2006, 10:47pm

You sure you dont want a cab to the airport cossie. I am very competative.
My number is..........eerrmm..........now what did I do with that bit of paper I had it written on ;) ;D