Ford Scorpio Forum - Print Page


    
      
        Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> Give/Need advice to/from others >> 24v cosworth 4x4 conversion
        
(Message started by: 2ndgear on Sep 21^st, 2006, 11:46am)

Title: 24v cosworth 4x4 conversion
Post by 2ndgear on Sep 21^st, 2006, 11:46am

Just about to convert my sierra 4x4 to 24v has anyone else done this? & if so how did they get on with the cylinder head drains to the sump - there is none on the 4x4 sump.
Cheers

Title: Re: 24v cosworth 4x4 conversion
Post by button on Sep 22^nd, 2006, 10:46am

you need to get two small pipes welded on the side of the sump i have such a sump if you are interested contact me 07768131866

Title: Re: 24v cosworth 4x4 conversion
Post by mazzy_j on Sep 22^nd, 2006, 10:43pm

Hi, try http://interford.co.uk/ and go to the forum section, there's plenty of sierra 24v conversion stuff on there. I found it looking for stuff to help me get going converting my cossie to a manual.

Matt

Title: Re: 24v cosworth 4x4 conversion
Post by twinturbo on Sep 24^th, 2006, 9:43pm

A pair of ISCV pipes and elbows from a 2.0 DOHC will help with the drains.

You must use the 4x4 oil piickup.

You will need to cutback the windage tray on the 24V to clear the sump.

You will need a spigot bearing for the gearbox imput shaft.

Custom downpipes.

any other questions...

TT