Ford Scorpio Forum - Print Page


    
      
        Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> Give/Need advice to/from others >> rear brake pads
        
(Message started by: 88or109 on Oct 18^th, 2006, 9:18pm)

Title: rear brake pads
Post by 88or109 on Oct 18^th, 2006, 9:18pm

Firstly I need to introduce myself, I haven't got a Ford Scorpio, :o :o :o I hope that wont be much of a bad start. However I have an ex-army 3/4 ton trailer that uses Ford Scorpio parts.

The problem is I don't what the part numbers are, therefore I would be grateful of a little help, I am replacing the brake shoes and beleive that they are rears as they have no sensor, the size are as follows;

length 90mm
width of pad 40mm, overall width of pad 55mm

It has two metal clips on the top of the pad.

Can anyone inform what the part number so I can order some please.

Many thanks

Title: Re: rear brake pads
Post by mr._floppy on Oct 18^th, 2006, 9:26pm

I don't have the Ford part number but if you've a Halfords near you the part number is HBP325 which will fit the rear caliper on the Sierra, Sapphire, Granada and Scorpio.

Approx £16 for an axle set .

Title: Re: rear brake pads
Post by hellblue on Oct 18^th, 2006, 9:30pm

If you take the pad to your local motor factors they will be able to match it up for you as they will have a book with pictures of all pads out there

Title: Re: rear brake pads
Post by Spannerdemon on Oct 18^th, 2006, 10:18pm

This site will give you pictures of the pads.

http://www.ebcbrakesdirect.com/default.asp

Just enter the Car model details and it will cough up the pictures. If you then click on the small picture of the pads you will get a full size graphic of them complete with all the measurements to enable you to check them.

Hope it helps you. :)