|
||
Title: Wiring Loom & Gearbox Post by drawlings on Oct 29th, 2006, 9:05am Hey ppl, Couple of questions that I need help with My car is going in to have it head gaskets done soon, and what I need to know is. How easy is it to change the loom that goes through the center of the engine (Cossie 24v)? Also, is there a manual gearbox that would fit the cossie engines? Cheers Dan |
||
Title: Re: Wiring Loom & Gearbox Post by solarpanel on Oct 29th, 2006, 10:17am have you got the loom,drop the rear of the box when heads off so you can see the loom over the box unplug it etc |
||
Title: Re: Wiring Loom & Gearbox Post by Dave on Oct 29th, 2006, 10:33am Don't think the loom is that difficult, you would have to have the inlet manifolds etc off which of course you will do with the heads anyway. Think people have accessed the plugs without doing anything to the box but the last plug or two is fiddly. There is a manual box that fits the 24v, think its the MT75 but someone will be along to confirm or give you a better option. Cheers |
||
Title: Re: Wiring Loom & Gearbox Post by drawlings on Oct 29th, 2006, 2:05pm Cheers Guys thanks for your tips |
||
Title: Re: Wiring Loom & Gearbox Post by adowds on Oct 30th, 2006, 12:55pm I changed my loom without dropping the box or taking exhaust off. Fiddley, and small hands helps, but do-able. Some very long nosed pliers helps too. Give me a shout if you need any more specific help. Al |
||
Ford Scorpio Forum » Powered by YaBB 1 Gold - SP 1.3.1! YaBB © 2000-2003. All Rights Reserved. |