Ford Scorpio Forum - Print Page


    
      
        Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> Give/Need advice to/from others >> DOOR PANEL
        
(Message started by: joanne on Nov 10^th, 2006, 1:53pm)

Title: DOOR PANEL
Post by joanne on Nov 10^th, 2006, 1:53pm

HI I HAVE A FORD SCORPIO BUT MY DAUGHTER HAS A FORD FIESTA AND THE HANDLE ON THE OUTSIDE OF THE DOOR HAS BROKEN DOES ANYONE KNOW HOW TO ET THE DOOR PANEL OFF.

HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Title: Re: DOOR PANEL
Post by Kjetil S on Nov 10^th, 2006, 2:08pm

I would guess at "bolted from the inside"

Title: Re: DOOR PANEL
Post by Snoopy on Nov 10^th, 2006, 3:42pm

The door panel is held on by screws in recessed places ussually under the arm rest and the window winders etc then hels in place by plastic clips which can break quite easily. They tend to be brittle . The panel will most likely lift off upwards as it is most likely clipped in along the top edge.

Ease the panel off with a very broad flat screw driver or similar. then the handle fixing nuts and door locking mechanism will be easily seen If you email me I will send you a couple of PDF docs which might help.