Ford Scorpio Forum (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
General >> Give/Need advice to/from others >> bob cam chain tensioners
(Message started by: penny11 on Feb 6th, 2007, 7:38pm)

Title: bob cam chain tensioners
Post by penny11 on Feb 6th, 2007, 7:38pm
having just replaced the chain guides and everything else it seems.... :D ( thanks to FPUK, very good service!!)
i have been asked to find out if the hydraulic cam chain tensioners are rebuildable/cleanable, or do you HAVE to buy new ones....?

has anyone dismantled one, are they simple to re-assemble, and is it a matter of cleaning out the accumulated crud, or is there something more...?

many thanks in advance

Title: Re: bob cam chain tensioners
Post by solarpanel on Feb 6th, 2007, 8:32pm
what year is car,you can pull them apart to clean.

Title: Re: bob cam chain tensioners
Post by martin_rowe on Feb 7th, 2007, 8:51am
for the extra cost replace them, they wear also & is not worth the risk.

Title: Re: bob cam chain tensioners
Post by penny11 on Feb 7th, 2007, 9:26am
Hello again, I am not sure of the vintage, i 'think' around '97...? I was hoping to get them stripped and cleaned, or is the problem that they wear beyond serviceable limits...?  I think they are v expensive...?

thanks all......:)

Title: Re: bob cam chain tensioners
Post by Octavian_P on Feb 7th, 2007, 9:37am
In Romania the price for a new tensioner is about 180 euros, same is the price for a chain.


PS: did you change the oil pump sprocket as well ?

Title: Re: bob cam chain tensioners
Post by penny11 on Feb 9th, 2007, 9:38pm
....  :) ouch ..... no worries about the sprockets, all were OK, it was just the guides that had gone, possibly because one or both tensioners were failing?
As we have never heard this engine run, we are trying to eliminate most of the problems first.....

cheers....   ;)



Ford Scorpio Forum » Powered by YaBB 1 Gold - SP 1.3.1!
YaBB © 2000-2003. All Rights Reserved.