Ford Scorpio Forum - Print Page


    
      
        Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> Give/Need advice to/from others >> 2.0 & 2.3 IACV
        
(Message started by: jonnycab on Jul 25^th, 2007, 2:30am)

Title: 2.0 & 2.3 IACV
Post by jonnycab on Jul 25^th, 2007, 2:30am

I know the 2.0 & 2.3 have differently angled multiplug connections...

But are they essentially the same part ? :)

Title: Re: 2.0 & 2.3 IACV
Post by Simmo on Jul 25^th, 2007, 7:31am

JC, They have two different part numbers and I think I have read on here that the 'ports' are different. I replaced the unit on my 2ltr and initially Fordparts UK sent the 'wrong' one and ,if I recall correctly, it was configured differently. The unit is referred to as Valve Assy-Air By-Pass. The 2.3 is 1058383 and the gasket 7090339. The 2ltr is 1063996 and the gasket 7165249. Given the different gasket numbers I guess that confirms a different 'port' layout. HTH. Mike.

Title: Re: 2.0 & 2.3 IACV
Post by jonnycab on Jul 25^th, 2007, 9:33am

Thanks Mike, it was just something I was wondering

Reason being is that there seems to be alot more second hand 2.0 ones available than 2.3. It would have been nice to know that the only difference was the angle of the multiplug...oh well :)

Title: Re: 2.0 & 2.3 IACV
Post by Octavian_P on Jul 25^th, 2007, 1:44pm

The valve on the 24 V is the same with the sierra and granada-scorpio (the DOHC 2.0 engine 125 bhp), as for the 2.3 if i remember correctly it's the same with the 2.9 12V