Ford Scorpio Forum - Print Page


    
      
        Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> Give/Need advice to/from others >> Scorpio breakers in lincolnshire??
        
(Message started by: SCORPY_NEWBY on Aug 14^th, 2007, 5:37pm)

Title: Scorpio breakers in lincolnshire??
Post by SCORPY_NEWBY on Aug 14^th, 2007, 5:37pm

Does anyone know of a breakers with any scorp's in Lincolnshire?. I need the studded part of the rear hub assembly really quickly!! ??? :'(

Title: Re: Scorpio breakers in lincolnshire??
Post by Kjetil S on Aug 14^th, 2007, 7:20pm

I don't know of any breakers (as I'm not even from the country), but if you've broken a stud, they can be bought from your FMD for a song. I replaced 4 of mine recently and paid approx £1 each (parts prices in Norway is usually double that of Britain) and they had a whole drawer of them in stock. Hope it helps.

Title: Re: Scorpio breakers in lincolnshire??
Post by scorpio197 on Aug 14^th, 2007, 8:07pm

check out your yellow pages ,theres a breaker in KINGSLYNN that breaks only fords ,cant remember the name but I have had bits from them before .I will see if I can find an invoice and I will PM you the address and phone number ....david

Title: Re: Scorpio breakers in lincolnshire??
Post by scorpio197 on Aug 14^th, 2007, 8:09pm

yes I know KINGSLYNN is in Norfolk not lincolnshire ,but its not that far away from lincolnshire .....

Title: Re: Scorpio breakers in lincolnshire??
Post by SCORPY_NEWBY on Aug 14^th, 2007, 8:20pm

The studs are ok but the bit that sits inside the bearings has a nasty habit of gouging chunks out of the outer bearing

Title: Re: Scorpio breakers in lincolnshire??
Post by petehull on Aug 14^th, 2007, 9:59pm

You would be better off fitting a complete hub assembly, I had masses of trouble a couple of years ago, I ended up buying 2 complete units, it solved the problem for me.

I have the part you want if you get stuck, I'm in Hull
hth

Pete

Title: Re: Scorpio breakers in lincolnshire??
Post by SCORPY_NEWBY on Aug 14^th, 2007, 11:17pm

Don't really have enough funds to buy new units. And need the part before friday for a long drive to a friends funeral. How much would you want for the part?