|
||
Title: 2.3 power steering pump replacement Post by jonnycab on Oct 31st, 2007, 12:33am As it now looks as though I've got to replace the steering rack (again ::)), it gives me the opportunity to replace the power steering pump (bit noisy when cold) with an almost brand new one that I picked up recently :) I've never replaced the pump before, so started reading through the procedure on the site ;) http://www.fordscorpio.co.uk/manual/steering/PASPumpDOHC.pdf Just one part of the replacement that I'm not quite sure about though....instruction 9, the bit about needing a special tool to replace the union sealing ring ??? Do you need this tool ? or can it be done without it ? Any advice please :) |
||
Title: Re: 2.3 power steering pump replacement Post by Tompion on Oct 31st, 2007, 1:04am Don't know the answer Jonny but looks to me as though it just stretches the ring over the thread so it doesn't get damaged, in which case some tape on the thread and something tapered like the nozzle of a mastic gun might do. |
||
Title: Re: 2.3 power steering pump replacement Post by jonnycab on Oct 31st, 2007, 1:13am Some tape & the nozzle of a mastic gun......hmmm Cheers Tompion, very inventive ;)....& I've got a few old mastic tubes in the shed :D |
||
Ford Scorpio Forum » Powered by YaBB 1 Gold - SP 1.3.1! YaBB © 2000-2003. All Rights Reserved. |