Ford Scorpio Forum - Print Page


    
      
        Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> Give/Need advice to/from others >> matrixmoany
        
(Message started by: eau_de_cologne on Feb 9^th, 2008, 5:37pm)

Title: matrixmoany
Post by eau_de_cologne on Feb 9^th, 2008, 5:37pm

My heater matrix don't work so I will flush it out, would sombody let which upper and lower pipes through the bulkhead inlet and outlet. ???

Title: Re: matrixmoany
Post by jonnycab on Feb 9^th, 2008, 7:11pm

Hi there, the matrix inlet pipe runs from the inlet manifold & the outlet pipe goes back into the engine block, just behind the water pump. Well on a 2.0 & 2.3 it does, not sure about the cossie or diesel ? :)

Hope this helps ;)