Ford Scorpio Forum - Print Page


    
      
        Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> Give/Need advice to/from others >> modulater
        
(Message started by: vosper on Mar 22^nd, 2008, 10:15pm)

Title: modulater
Post by vosper on Mar 22^nd, 2008, 10:15pm

Hi
Having checked the main site how to fix controller, the hole's in the pictures do not match the one's on the modulater section and the one i removed is plastic even then the do not match the controller pics.

Title: Re: modulater
Post by gozz on Mar 22^nd, 2008, 10:22pm

vosper.
If you mean the ABS system,it changed around R reg,yours must be t'other one.
GOZZ

Title: Re: modulater
Post by Tompion on Mar 23^rd, 2008, 1:48am

The ABS controller on the main site is plastic.
Others have reported doing a similar repair to the older module, but I don't think any pictures have been posted.

The faulty pins are for the motor socket, and are on the other side of the controller directly opposite where the 2 pin plug for the motor plugs in. I assume the same would apply to the earlier (MK 1V) controller, but not having seen one I cannot confirm this.