Ford Scorpio Forum - Print Page


    
      
        Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> Give/Need advice to/from others >> Steel wheels
        
(Message started by: dead-goon on Jun 16^th, 2008, 6:42pm)

Title: Steel wheels
Post by dead-goon on Jun 16^th, 2008, 6:42pm

Is it possible to put steel wheels from a Mondeo onto the Scorpio? Do they have a different offset? I know the PCD is the same.
Mine already has a pair of steels on it (with 195/60/15 tyres on - I have 4 of those tyres in my shed ;)), but I'm not sure what they're off. I like the original alloys but the tyres are too expensive and I don't think they'll cope too well with the poor roads up here.

Title: Re: Steel wheels
Post by Matt on Jun 16^th, 2008, 6:57pm

hi mate,

i think the mondeo steels are only 14" and they wont fit the scorpio (wont go over the brakes)

sounds like you may have a set of scorpio steels in your shed

Title: Re: Steel wheels
Post by 5stud on Jun 16^th, 2008, 7:05pm

read parts wonted.15 steel wheels

Title: Re: Steel wheels
Post by dead-goon on Jun 19^th, 2008, 10:03am

on 06/16/08 at 18:57:53, Matt wrote:

hi mate,

i think the mondeo steels are only 14" and they wont fit the scorpio (wont go over the brakes)

sounds like you may have a set of scorpio steels in your shed

They're Rover steel wheels unfortunately, but they're wearing the same 195/60/15s as the 2 steel wheels that are already on my Scorpio. The previous owner wouldn't give me the whole set of steel wheels. ::)