Ford Scorpio Forum - Print Page


    
      
        Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> Give/Need advice to/from others >> Steering Rack Parts
        
(Message started by: Bikerdon on Nov 14^th, 2008, 12:31pm)

Title: Steering Rack Parts
Post by Bikerdon on Nov 14^th, 2008, 12:31pm

Hi all, Hope this info might be of use to someone. On the scorpio steering rack the (spindle rod-connecting) ie. the inner ball joint with the arm which connects to the track rod end is available from Ford. Part No is: 1 029 836, cost is £38+VAT. I got one from my Friendly Motor Factor, its a Quinten Hazell part so very good quality, and it only cost £26 inc VAT. QH part No is: QR3306S. Maybe save someone a few £'s. Bikerdon

Title: Re: Steering Rack Parts
Post by gozz on Nov 14^th, 2008, 3:11pm

Thanks !
I usually have a recon rack because the biggest problem is seal leakage,but it is handy to know rods are available pattern part.
GOZZ.

Title: Re: Steering Rack Parts
Post by mindofitsown on Nov 19^th, 2008, 4:45pm

Hi, Somewhere I have a QH inner ball joint arm as you describe, still in its box. Never got to use it as I replaced the whole rack (and that was done to solve a steering problem which in the end was something else so I now have a complete used rack as well). If someone wants the spindle thingy for a tenner plus postage...I'm happy to oblige.