|
||
Title: Anti-Roll bar bush Post by adam on Nov 21st, 2008, 12:00am A quick one! Anyone know the correct diameter to replace the front ones! Both are u/s on my 2.3 '98 facelift model. I am looking to fit heavy duty ones! I believe they are 20mm without measuring myself Is this correct? Thanks |
||
Title: Re: Anti-Roll bar bush Post by Jonnycab on Nov 21st, 2008, 2:23am 20mm sounds about right, but couldn't say for absolute certainty without going outside & measuring them. So it looks as though you'll have to go out & have a look for yourself ;) Where do you get HD ones from ?....the only ones I've ever known are the ones that Ford sell for £6.00 each :) |
||
Title: Re: Anti-Roll bar bush Post by adam on Nov 21st, 2008, 3:10am Hi Jon thanks, Yes looks like i will have to dig out the vernier :o Powerflex http://www.powerflex.co.uk/products.asp?cat=0010&catalog=2510&submit1.x=27&submit1.y=9 appear to show them at 28mm? Although they only show for upto 1996? BTW, I don't mind paying that extra for a quality item. |
||
Title: Re: Anti-Roll bar bush Post by Jonnycab on Nov 21st, 2008, 3:25am What powerflex are listing is either wrong or probably for the Granada :-/ I've just been out to the shed (that's dedication for you ;)) & measured my spare anti roll bar & it comes in at just under 22mm. So the bush is most likely about 20mm so it fits very tightly around the bar when the bracket is bolted up. 28mm will be way too big :) |
||
Title: Re: Anti-Roll bar bush Post by adam on Nov 21st, 2008, 4:08am I love you Jon :-* :D My vernier is safe for another day! I will have a look on Ebay to see if any powerflex products are available on there. Thanks Jon I owe you one. Adam |
||
Title: Re: Anti-Roll bar bush Post by Jonnycab on Nov 21st, 2008, 4:22am Hmmm......not sure if I should be glad or worried :-/.......... ;D |
||
Title: Re: Anti-Roll bar bush Post by adam on Nov 21st, 2008, 4:39am I love you in a manly way Jon, if there is such a thing ;D :D Just emailed this seller on Ebay to see if they can get hold of some for the Scorpio Ebay (http://cgi.ebay.co.uk/Ford-Mondeo-MK1-MK2-Front-Anti-Roll-Bar-Bushes_W0QQitemZ370066113449QQcmdZViewItemQQptZUK_CarsParts_Vehicles_CarParts_SM?hash=item370066113449&_trksid=p3286.c0.m14&_trkparms=72%3A1301%7C66%3A2%7C65%3A12%7C39%3A1%7C240%3A1318) There are some Powerflex as well so will contact them as well and let you know. |
||
Title: Re: Anti-Roll bar bush Post by Jonnycab on Nov 21st, 2008, 4:47am Just kidding ;)......good luck, although I reckon you'll be buying them from Ford :) P.S...don't forget that the roll bar itself may be worn down & pitted where the bush goes around it.....so even brand new bushes will never be as tight a fit as when it came out of the factory :) |
||
Title: Re: Anti-Roll bar bush Post by adam on Nov 21st, 2008, 4:58am Yes, probably will end up getting them from Henry. It's amazing how few alternative parts were made for these scorpios. At this rate , i will have to manufacture my own spares in a few years ;D |
||
Title: Re: Anti-Roll bar bush Post by adam on Nov 21st, 2008, 5:02am Jon, i don't want to kiss you anymore now after you telling me that ;D Yes, you are right. I will check it out over the weekend and see how worn it is. Thanks again Jon :) |
||
Title: Re: Anti-Roll bar bush Post by gozz on Nov 21st, 2008, 8:03am Adam. It IS the granada for which heavy duty bushes are available,they fit on the ENDS of the bar in the track control arms,the Scorpio of course using wishbone set up.Thebushes are solid rather than void,I used to fit them to my Granada hearses and limos. GOZZ |
||
Ford Scorpio Forum » Powered by YaBB 1 Gold - SP 1.3.1! YaBB © 2000-2003. All Rights Reserved. |