Ford Scorpio Forum - Print Page


    
      
        Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> Give/Need advice to/from others >> Head size
        
(Message started by: adam on Jan 29^th, 2009, 5:28pm)

Title: Head size
Post by adam on Jan 29^th, 2009, 5:28pm

I neeed to remove the steering wheel and the rear bumper. Can anyone tell me what tool head size and type is required to remove the retaining bolts on both.

Cheers

Title: Re: Head size
Post by Scorpio_Mike on Jan 29^th, 2009, 6:12pm

For the rear bumper I think the bolts are for a T-35 Torx bit but it is more likely that an angle grinder will be the more appropriate tool as they are normally siezed up and the Torx recess will round out. :'(

Not sure about the steering wheel.

Title: Re: Head size
Post by adam on Jan 30^th, 2009, 4:16pm

Thanks Mike, will get one this weekend.
Just need to know the torx size for the steering wheel now. Thanks