Ford Scorpio Forum - Print Page


    
      
        Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> Give/Need advice to/from others >> Project build
        
(Message started by: Merlin on Jan 29^th, 2009, 9:14pm)

Title: Project build
Post by Merlin on Jan 29^th, 2009, 9:14pm

First post so hello to all.
On to buisness, I am building a project based on scorp/cossie running gear but I need to fit as basic as possible loom (yes I know :o), I found a site that had a list of pin-outs which you need to make it work and nothing else but as dumb as I am I didn't bookmark it and now I can't find it again (doh). The site was by a guy who was fitting this setup into a mk2 escort i think, I know I could always go through all the diagrams but I could do with it running in my lifetime :). Has anyone come across this site or the list?
Sorry if this is in wrong section.

Title: Re: Project build
Post by Matt on Jan 30^th, 2009, 4:54pm

hi merlin, it wasnt http://www.fordpower.org.uk was it?

Title: Re: Project build
Post by Merlin on Jan 30^th, 2009, 7:30pm

No, it wasn't a forum, it was on a stand alone site only about the project

Title: Re: Project build
Post by Snoopy on Jan 31^st, 2009, 10:18am

If it was a RECENT visit, then look in your browser history and it will be in there , may take a little time but worth trying.

Title: Re: Project build
Post by Merlin on Feb 17^th, 2009, 11:44pm

Checked all of that and no joy, beginning to think it was my imagination ??? :'(

Title: Re: Project build
Post by martin_rowe on Feb 18^th, 2009, 8:44am

Merlin
may be able to print off all ECU pin data & wiring diagram if would help.

Title: Re: Project build
Post by Merlin on Feb 18^th, 2009, 10:56pm

I've got the wiring diagrams but going through them all and working out all the stuff I can do without is a job I can do without, looks like it's going to be the only way though :'(