Ford Scorpio Forum - Print Page


    
      
        Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> Give/Need advice to/from others >> obd2 test on cossie
        
(Message started by: david49uk on Feb 8^th, 2009, 6:21pm)

Title: obd2 test on cossie
Post by david49uk on Feb 8^th, 2009, 6:21pm

the softwere i am using worked fine with my scorpio 2.3 ultima but is not picking up any sensor readings only one error code wich is this P1152 O2 Sensor Heater Circuit Low Voltage (Bank 2 Sensor 1) dose anybody know what it means and why mf softwere want work with cossie . i am using proscan 5.0. dave

Title: Re: obd2 test on cossie
Post by scorpio_man on Feb 8^th, 2009, 7:19pm

hi there

the code is telling you that the heater inside the lambda sensor on the 2nd bank (r/h/s) isn't working. it means that the sensor will need the exhaust gasses to heat up. this can knock the emissions out slightly from start up. nothing much to worry about for the moment.

re the obd scan. are you using a different version (updated) of the software? it appears to working to certain extent anyway.

hth

Title: Re: obd2 test on cossie
Post by david49uk on Feb 9^th, 2009, 12:09am

thanks for that scorpio man would that be r/h/s from inside the car or from the front. dave

Title: Re: obd2 test on cossie
Post by scorpio_man on Feb 9^th, 2009, 6:28am

hi there

looking into the car. the pre cat one.

hth