|
||
Title: Capacity increase? Post by tve on Feb 22nd, 2009, 8:15pm Greetings to all. Prompt as to increase capacity on 2.3. The turbine or a supercharger. Thanks. |
||
Title: Re: Capacity increase? Post by Jonnycab on Feb 23rd, 2009, 2:00am Superchipping the ECU may be the cheaper & easier option but I don't think it will give you huge increase in power :) Can the 2.3 engine & drive actually handle a turbo or supercharger without....as they say....blowing a gasket ? :-/ |
||
Title: Re: Capacity increase? Post by Highlander on Feb 23rd, 2009, 9:15pm fit a 2.0 16v diff Will give you nearly 10% faster acceleration |
||
Title: Re: Capacity increase? Post by Scorpio_Mike on Feb 23rd, 2009, 9:56pm I've heard about fitting RS2000 camshafts and modded ECU somewhere. |
||
Title: Re: Capacity increase? Post by Highlander on Feb 23rd, 2009, 9:58pm remove the cat internals, that'll give you a few more bhp :) |
||
Title: Re: Capacity increase? Post by tve on Feb 24th, 2009, 9:52am It is possible more in detail about 2.0 16 |
||
Title: Re: Capacity increase? Post by Highlander on Feb 25th, 2009, 12:04am Hi, the 2.0 16v diff has a ratio of 4.27 ie prop shaft turns 4.27 times to turn the rear wheels one complete cycle. your 2.3 should have a 3.9 diff, prop turns 3.9 times to turn the rear wheels once. so the 4.27 diff gives a lower gearing through all the gears giving better acceleration. You will find your engine revs around 10% higher for the same speed than it did with the 3.9 diff and your speedo will read 10% faster unless you change the toothed drive pinion on the VSS for the 4.27 version. Your mpg will be lower on a motorway run as your engine is revving higher but i think it actually improves the mpg around town as its lower geared. But its a straight swap, I can do them in around 1-2 hours easily depending on the bolts :) I've done it on a few 24v's, they have a 3.6 diff so the 4.27 makes a big difference, about 2 secs off the 0-60 time ;) |
||
Title: Re: Capacity increase? Post by 5stud on Feb 25th, 2009, 10:23am ford them self tuned up the mk2 st24v mondeo and caled it a st 200 .it knocked point 2 of a second off the 0 to 60 and ganed 2 mph on the top speed.and that whose by ganeing 30 bhp ??? |
||
Title: Re: Capacity increase? Post by tve on Feb 27th, 2009, 12:44pm Wheels большего diameter, leaders. |
||
Title: Re: Capacity increase? Post by Highlander on Feb 27th, 2009, 1:24pm on 02/27/09 at 12:44:52, tve wrote:
Dont understand what this means? |
||
Title: Re: Capacity increase? Post by Jonnycab on Feb 28th, 2009, 3:40am ........Ditto ;) |
||
Title: Re: Capacity increase? Post by nice_1 on Mar 2nd, 2009, 10:02am Highlander...what kind of RPM is a 24v doing fitted with a 4.27diff @ 60mph?? are the 24v saloon and estates same axle ratios?? |
||
Title: Re: Capacity increase? Post by Highlander on Mar 3rd, 2009, 9:17pm Yep saloon and estate use the same ratio. There is some Ford literature out there that says otherwise but its wrong ;) the RPM sits about 1000 higher with the 4.27 diff on a 24v than it does with the 3.64. Havent got a note about it at 60 but at 70 the 4.27 will show 3500 instead of 2500 with the standard 3.64 |
||
Ford Scorpio Forum » Powered by YaBB 1 Gold - SP 1.3.1! YaBB © 2000-2003. All Rights Reserved. |