Ford Scorpio Forum (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
General >> Give/Need advice to/from others >> Distributor Cap and Rotor Arm
(Message started by: TomP on Feb 25th, 2009, 12:42pm)

Title: Distributor Cap and Rotor Arm
Post by TomP on Feb 25th, 2009, 12:42pm
Is there a service interval for replacing the Distributor Cap and Rotor Arm on a 2.9 12V Scorpio?

I'm going through the service schedule and taken off the cap and arm. Not really sure how to tell if they need replacing. There is some silver/grey residue on both the tip of the Arm and also on the contact points inside the Cap.

Been quoted £19.36 and £8.72 +VAT by local Ford dealer for parts but don't want to change unless necessary.

Thanks.

Title: Re: Distributor Cap and Rotor Arm
Post by joe-satch on Feb 25th, 2009, 5:06pm
hi tomp.
i change mine (mk3) every year...if the contact segments within the cap are pitted,and the rotor arm looks worn,change them..or if only for piece of mined,but i dont pay ford prices...i go to my local A1 MOTOR STORE....never had any problems with non ford parts anyway. :).regards den. :).



Ford Scorpio Forum » Powered by YaBB 1 Gold - SP 1.3.1!
YaBB © 2000-2003. All Rights Reserved.