Ford Scorpio Forum - Print Page


    
      
        Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> Give/Need advice to/from others >> Clutch slave cylinder measurements
        
(Message started by: Stormy on May 18^th, 2009, 7:00pm)

Title: Clutch slave cylinder measurements
Post by Stormy on May 18^th, 2009, 7:00pm

Hello,

I am converting my '92 scorpio V6 2.9 12v engine to a hydraulic clutch.
This because I have also fitted a tilton pedalbox.

Has anyone the measurements / bore&stike of the standard slave cylinder of a 2.0 16v '97 scorpio?
(this is the one I will be using - I suppose all are the same?)

I need this info to be able to order the correct master cylinder.

Thanks, Koen

Title: Re: Clutch slave cylinder measurements
Post by Tompion on May 18^th, 2009, 8:05pm

I've not looked at one, but is as simple as bore & stroke with a concentric slave cylinder?

Details of the type used here:
http://www.fordscorpio.co.uk/mantrans.htm

Title: Re: Clutch slave cylinder measurements
Post by Stormy on May 19^th, 2009, 4:47am

It is the standard slave cylinder from the link you posted.
How can I determine the bore & stroke?

Thanks, Koen