Ford Scorpio Forum - Print Page


    
      
        Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> Give/Need advice to/from others >> 2.9 v6 12v tappets (specs and adjustment order)
        
(Message started by: JimmyJaffa on Jun 17^th, 2009, 8:41pm)

Title: 2.9 v6 12v tappets (specs and adjustment order)
Post by JimmyJaffa on Jun 17^th, 2009, 8:41pm

Hi, head gasket went on Saturday, changed the gaskets and had the heads skimmed as well. I was just wondering if any one knew the adjustment order and valve clearances please. engine is a 2.9 v6 12v many thanks.

Title: Re: 2.9 v6 12v tappets (specs and adjustment order
Post by colin_j on Jun 17^th, 2009, 10:24pm

Hi, on the scorp 95 12v there hydraulic you dont need to set valve clearance unless you have stripped the pushrods and folowers down hope this helps.