|
||
Title: Does anybody know what is that? (see photo) Post by Ivan Pevnitsky on Jul 6th, 2009, 2:44pm Could anyone tell me what is that, and shouldn't it be something connected to it? (It's under the airflow filter on my RHD) http://ipevnitsky.fromru.su/05072009605_arrow_s.jpg (http://ipevnitsky.fromru.su/05072009605_arrow.jpg) Thanks |
||
Title: Re: Does anybody know what is that? (see photo) Post by Snoopy on Jul 6th, 2009, 4:01pm Any more details PLEASE I am Unable to read part number can you please supply it.. What engine and Model of Scorpio but I think you will find that is either blanked off or needs to be to atmosphere |
||
Title: Re: Does anybody know what is that? (see photo) Post by Highlander on Jul 6th, 2009, 4:25pm MAP sensor, thats how it should look, nothing missing :) |
||
Title: Re: Does anybody know what is that? (see photo) Post by Ivan Pevnitsky on Jul 6th, 2009, 5:06pm The part no is E7FF-12A644-A2A (or E7EF-12A644-A2A) 2 Highlander: I could not find it in manuals. |
||
Title: Re: Does anybody know what is that? (see photo) Post by Ivan Pevnitsky on Jul 6th, 2009, 5:11pm googling for E7EF-12A644-A2A gives me MAP sensor http://www.vag-service.ru/tecdoc/image/757810.jpg But what it can measure if it's not connected to any air/vacuum pipe! |
||
Title: Re: Does anybody know what is that? (see photo) Post by wojtekor on Jul 6th, 2009, 5:15pm Ivan read carefully :) Stuart already told you that yes it's a map sensor and that it is OK and everything is as it should be. nothing to worry about ::) |
||
Title: Re: Does anybody know what is that? (see photo) Post by Simmo on Jul 6th, 2009, 5:16pm If it has an electrical connection,which it appears to have, then it is receiving info from the EEC and reads the Manifold Absolute Pressure. ;) It is shown on THIS diagram (http://www.fordscorpio.co.uk/eecv.htm) but its function does not appear to be mentioned. |
||
Title: Re: Does anybody know what is that? (see photo) Post by Ivan Pevnitsky on Jul 6th, 2009, 5:25pm It seems there's a little language barrier between. Do you mean it measures the "outair" pressure (I mean the atmosphere)? Am I correct? If it's a sensor: 1. It ahs to measure the pressure 2. it has to report results. for point 2 - This is a connector for point 1 - Shouldn't be there a pipe form air throttle? |
||
Title: Re: Does anybody know what is that? (see photo) Post by Tompion on Jul 6th, 2009, 5:39pm Yes it reads barometric pressure ( "outair" pressure ) & nothing is missing |
||
Title: Re: Does anybody know what is that? (see photo) Post by Ivan Pevnitsky on Jul 6th, 2009, 5:45pm Now I see. There're just a lot of pipes and I want to be sure they're connected corerctly and nothing is missing. Thank you all! |
||
Title: Re: Does anybody know what is that? (see photo) Post by Tompion on Jul 6th, 2009, 5:49pm Details here: http://www.fordscorpio.co.uk/ccmonitor.htm Under BAROMETRIC PRESSURE SENSOR |
||
Title: Re: Does anybody know what is that? (see photo) Post by Snoopy on Jul 9th, 2009, 9:11am 1041355 is the finis number |
||
Title: Re: Does anybody know what is that? (see photo) Post by Ivan Pevnitsky on Jul 9th, 2009, 5:36pm Snoopy, how to know the corellation between FINIS and part numbers? |
||
Title: Re: Does anybody know what is that? (see photo) Post by Stixy on Jul 9th, 2009, 5:49pm Barometric presure sensor Only fitted to 16v Auto's EEC V TECHNICAL SERVICE TRAINING BOOK SAYS " The barometric presure sensor sends the EEC-V a signal corresponding to instantaneous atmospheric presure . this signal combined with the TP signal in engine load conditions in which the engine torque cannot be determined from the MAF signal o form a substitute signal . the engine torque is required to control the precise contact presure of the brake bands in the A4LDE transmission to ensure smooth and slip free gear changes " |
||
Title: Re: Does anybody know what is that? (see photo) Post by Snoopy on Jul 9th, 2009, 8:18pm I searched through the Microcat for "sensors" and found it that way but the part number given is different to that you gave .. Maybe it because its an EU vehicle and my Microcat is for the UK . I don't know . |
||
Title: Re: Does anybody know what is that? (see photo) Post by Stixy on Jul 9th, 2009, 8:45pm I thought the 12v run EEC-IV and it was a map sensor ? I have only had one 12v and to be honest didnt have a lot to to it |
||
Title: Re: Does anybody know what is that? (see photo) Post by Snoopy on Jul 10th, 2009, 7:20am Sorry you are quite correct ... its me getting older and more confused...! |
||
Ford Scorpio Forum » Powered by YaBB 1 Gold - SP 1.3.1! YaBB © 2000-2003. All Rights Reserved. |