Ford Scorpio Forum - Print Page


    
      
        Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> Give/Need advice to/from others >> front crank seal 2.3
        
(Message started by: 5stud on Aug 13^th, 2009, 12:14am)

Title: front crank seal 2.3
Post by 5stud on Aug 13^th, 2009, 12:14am

hase any member replased the front crank seal on a 2.3 ford dont sell just the seal you have to buy the front cover at £61 plus vat

Title: Re: front crank seal 2.3
Post by Jonnycab on Aug 13^th, 2009, 1:20am

Buy the front cover ?....Do you mean the lower timing chain cover ? :-/

I had the front crank seal on my 2.3 replaced by the local garage a couple of years ago (didn't fancy doing it myself) & it was only the seal they replaced, the old cover was put back on with a new gasket :)

Title: Re: front crank seal 2.3
Post by gozz on Aug 13^th, 2009, 8:28am

5stud.
Best go to a bearing factor and get a seal to match.
GOZZ.

Title: Re: front crank seal 2.3
Post by joe-satch on Aug 13^th, 2009, 8:55am

my local A1 motor stores have front crankshaft oil seals,i replaced a front seal in a friends 2.0ltr sierra only a few weeks ago. :).

Title: Re: front crank seal 2.3
Post by tootman318 on Aug 13^th, 2009, 5:20pm

not sure if its the same, but 24v front crank oil seal is the same as my mk3 cortina 2ltr pinto. know this cause ordered 1 for each car, when they came both the same and they both fit!!!!!!!!!

Title: Re: front crank seal 2.3
Post by 5stud on Aug 18^th, 2009, 12:29am

dont believe fords epc the seal is sold sepretley under part no 1669254 but at £16. .beter still buy a 56 mm od 42 mm id 7 mm wide seal at £4.be worned if the belt comes off it can go behind the crank puley then pushing the seal into the timing chains .