|
||
Title: Fuel Cut Off Loom Post by Kenboy on Aug 24th, 2009, 7:59am Hi I have recently acquired a spare wiring loom 2.3 that is in need of rewiring in places (Bare Wire) this is something new to me, initially there are two questions, what size wire will I need to purchase and secondly how do I appropriately seperate wire from various multi plugs and refit. Cheers Ken |
||
Title: Re: Fuel Cut Off Loom Post by gozz on Aug 24th, 2009, 8:51am Ken. Just tape each individual wire then tape them up into a loom,take note of where each one emerges from the loom though.I have done several like this and never had any trouble afterwards,after all you only need separation and insulation ! GOZZ |
||
Title: Re: Fuel Cut Off Loom Post by Kenboy on Aug 24th, 2009, 6:54pm Hi Gozz advice taken on board and will do it your way I had visions of buying metres of wire and soldering so once again thanks, oh by the way its just an insurance job I inspect mine fairly regular and all seems ok, once again thanks. Kenboy |
||
Ford Scorpio Forum » Powered by YaBB 1 Gold - SP 1.3.1! YaBB © 2000-2003. All Rights Reserved. |