Ford Scorpio Forum - Print Page


    
      
        Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> Give/Need advice to/from others >> dash removal
        
(Message started by: Chieftain on Sep 19^th, 2009, 12:46pm)

Title: dash removal
Post by Chieftain on Sep 19^th, 2009, 12:46pm

Searched in vain for this topic, need to think about replacing some bulbs, anyone point me in right direction, also it will be a chance to check the solder on the airbag light. ;D

Title: Re: dash removal
Post by Jonnycab on Sep 19^th, 2009, 1:11pm

Is this the page you're looking for......http://www.fordscorpio.co.uk/fasciabulbs.htm ..... :)

Title: Re: dash removal
Post by Robzere31 on Sep 19^th, 2009, 1:15pm

I need to replace a few of my dash bulbs,
but it seem a hell of a lot of hassle having to take out the whole dash just to change a bulb or two ???

Title: Re: dash removal
Post by Tompion on Sep 19^th, 2009, 1:23pm

If you're not buying the bulbs from Ford get the lower wattage ones, otherwise they can melt the plastic in the instrument cluster.
If I remember correctly Halfords had 5W & 1.2W

Title: Re: dash removal
Post by Tekno on Sep 19^th, 2009, 5:37pm

These are correct bulbs:
Small bulbs: T5 W2X4.6 1,2W 12V
Bigger bulbs: T10 W3W 3W 12V

http://img525.imageshack.us/img525/8770/dsc04912.th.jpg (http://img525.imageshack.us/i/dsc04912.jpg/)

Title: Re: dash removal
Post by Chieftain on Sep 20^th, 2009, 6:38pm

Thanks Johhny thats the one, what am I checking as regards solder joints for the airbag light as after reading all about it and the different causes I am sure that is my problem.