|
||
Title: gearbox Post by auntiephil on Oct 5th, 2009, 2:08pm hi all, my car is a 2.3 ,its currently crunching into 2nd and occasionaly into 3rd especially when cold, i have a spare diesel gearbox , can this be swapped and will the vss have to come with it? Or is there anything i can do to the current gear box in the 2.3, cheers,phil. |
||
Title: Re: gearbox Post by Dave2302 on Oct 5th, 2009, 2:42pm AFAIK diesel box is not a straight swap, but just get a good gearbox man to change the bronze synchro rings for you. Do it now rather than later cos otherwise it will damage the dogs on the hubs and gears and make it a much dearer job. ;) HTH Dave |
||
Title: Re: gearbox Post by auntiephil on Oct 7th, 2009, 7:46pm Thanks Dave. As dave is not totally sure if its a straight swap, has anyone else got any thoughts, cheers,phil. |
||
Title: Re: gearbox Post by Highlander on Oct 7th, 2009, 10:09pm Different bellhousings so they would have to be swapped over. VSS will be the same but I would ASSUME the sprocket in the box will need swapped as the 2.3 and the diesel have different diff ratios although I dont know what number of teeth they have/should have (Diesel manual has 22) The toothed sprocket may be able to be removed through the VSS opening but again i'm not sure how its attached. The diesel box will have a better top gear ratio though for cruising Diesel boxes are worth money as they are used in 24v manual conversions, i'd sell it and buy another manual 16v box ;) |
||
Title: Re: gearbox Post by auntiephil on Oct 9th, 2009, 4:02pm yep, sounds too complicated to swap, i'll take your advice and just sell it,cheers,phil. |
||
Title: Re: gearbox Post by Ivan Pevnitsky on Oct 15th, 2009, 5:33pm Hi guys! Is it possible to set BOB A4LDE (what is BOB) intead one on my 1996 2.3 16V? Thanks |
||
Title: Re: gearbox Post by tlundkvi on Oct 15th, 2009, 6:54pm on 10/15/09 at 17:33:15, Ivan Pevnitsky wrote:
BOB = Scorpio II 24V Cosworth engine |
||
Title: Re: gearbox Post by Dave2302 on Oct 15th, 2009, 7:10pm No ;) |
||
Title: Re: gearbox Post by Ivan Pevnitsky on Oct 15th, 2009, 8:58pm Sure? Asking just because twinturbo said here http://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl?board=admin3;action=display;num=1255244470 it's possible with replacing bell housing Thanks |
||
Title: Re: gearbox Post by exaktaman on Oct 16th, 2009, 9:54pm Hi Fellas, Thanks for the advice. The Polish ones look good but as you say pricey, I'll add them to my Christmas list. Exaktaman |
||
Ford Scorpio Forum » Powered by YaBB 1 Gold - SP 1.3.1! YaBB © 2000-2003. All Rights Reserved. |